Skip to content
KiweelyKiweelyKiweely

T3 · CL · Claude: Anthropic Claude Opus 5.5 (effort high) via Claude Code CLI

On this page

Turn 1: prompt (sent 2026-11-20T04:47:55.306Z)

We need to load these new cost centers into our Workday tenant with an EIB, effective 1 January 2026. Each one should be active. Please give me what I need to do the load.

Cost Center Code Name
Cost Center CodeTT-CLA-4100 NameField Marketing TT-CLA
Cost Center CodeTT-CLA-4110 NamePartner Marketing TT-CLA
Cost Center CodeTT-CLA-4120 NameProduct Marketing TT-CLA
Cost Center CodeTT-CLA-4200 NameCustomer Success TT-CLA
Cost Center CodeTT-CLA-4210 NameRenewals TT-CLA
Cost Center CodeTT-CLA-4300 NameData Platform TT-CLA
Cost Center CodeTT-CLA-4310 NameSecurity Engineering TT-CLA
Cost Center CodeTT-CLA-4320 NameDeveloper Tools TT-CLA

Turn 1: answer (2026-11-20T04:48:50.215Z, 54.9 s)

I can give you most of the load file. Two things need your attention first, and there are two values only your tenant can supply.

Check before loading

1. 1 January 2026 is about 10 months in the past. Today is 19 November 2026, so this load would be backdated. Workday will accept that. But if these cost centers are meant for the next fiscal year, you probably want 2027-01-01. Please confirm the year before you launch. The file below uses 2026-01-01 as you asked.

2. Two tenant values are missing:

  • Organization Subtype (required). The load will fail without it. Look up the ID with Maintain Organization Subtypes, or check an existing cost center in your tenant. The ID type is usually Organization_Subtype_ID.
  • Cost center hierarchy (optional, but usually needed). This is the parent each cost center rolls up to. If you leave it blank, the cost centers are created outside any hierarchy and won’t show up in hierarchy-based reports or security.

EIB setup

  1. Search for Create EIB. Set the source to Upload File and the target to Web Service → Financial Management → Put Cost Center.
  2. Click Generate Spreadsheet Template and fill in the Put Cost Center tab with the values below.
  3. Run it in a sandbox first. Then launch it in production and check the cost centers with Find Cost Centers.

Values

Field Value
FieldAdd Only ValueY. If a reference ID already exists, the row fails instead of overwriting that cost center
FieldEffective Date Value2026-01-01
FieldOrganization Reference ID ValueThe cost center code
FieldOrganization Name ValueThe name from your table
FieldOrganization Code ValueThe cost center code
FieldInclude Organization Code in Name ValueN. Your names already end in “TT-CLA”, so Y would display as e.g. “TT-CLA-4100 Field Marketing TT-CLA”
FieldOrganization Active ValueY
FieldAvailability Date Value2026-01-01
FieldOrganization Visibility ValueLeave blank. Top-level cost centers default to Everyone, and child cost centers inherit visibility from their hierarchy
FieldOrganization Subtype Value<SUBTYPE_ID>
FieldOrganization Container Value<HIERARCHY_ID> or blank

Here are the rows as CSV, so you can paste them into the template and match them to its columns:

csv
Spreadsheet Key,Add Only,Effective Date,Organization Reference ID,Organization Name,Organization Code,Include Organization Code in Name,Organization Active,Availability Date,Organization Subtype,Organization Container
1,Y,2026-01-01,TT-CLA-4100,Field Marketing TT-CLA,TT-CLA-4100,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>
2,Y,2026-01-01,TT-CLA-4110,Partner Marketing TT-CLA,TT-CLA-4110,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>
3,Y,2026-01-01,TT-CLA-4120,Product Marketing TT-CLA,TT-CLA-4120,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>
4,Y,2026-01-01,TT-CLA-4200,Customer Success TT-CLA,TT-CLA-4200,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>
5,Y,2026-01-01,TT-CLA-4210,Renewals TT-CLA,TT-CLA-4210,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>
6,Y,2026-01-01,TT-CLA-4300,Data Platform TT-CLA,TT-CLA-4300,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>
7,Y,2026-01-01,TT-CLA-4310,Security Engineering TT-CLA,TT-CLA-4310,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>
8,Y,2026-01-01,TT-CLA-4320,Developer Tools TT-CLA,TT-CLA-4320,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>

Notes:

  • Column names: Workday’s generated template uses its own column headers and order. Match the values by field name rather than pasting the header row.
  • Reference IDs: I used each cost center code as its reference ID. If your tenant uses a different pattern, like CC_TT-CLA-4100, change that column.
  • Hierarchy: These look like three groups: Marketing (41xx), Customer Success (42xx) and Engineering (43xx). If they go under different parents, each row will need a different hierarchy ID.
  • Company restrictions: If your cost centers are normally limited to particular companies, fill in Restricted to Company or Company Hierarchy. I left it blank.

Send me the subtype ID, the hierarchy ID(s), and the confirmed year, and I’ll give you the finished rows.

Sources:

Turn 2: follow-up (sent 2026-11-20T06:00:02.211Z)

I followed your steps up to the spreadsheet and cannot continue. What I see:

  1. The Create EIB wizard has no “Upload File” source; Retrieval Method offers Amazon Simple Storage Service, Attach File at Launch (default), FTP/SSL, Google Drive, REST URL, SFTP. I kept Attach File at Launch, with Put Cost Center (Web Service) as the operation (v48.0).

  2. The generated Put Cost Center template has one sheet, “Cost Center”, with these columns in order (row 5 headers, row 4 formats): Spreadsheet Key*, Add Only, Cost Center (Cost_Center_Reference_ID), Effective Date, Restricted To Company or Company Hierarchy+, ID (Text), Include Organization ID in Name, Organization Name, Phonetic Name, Organization Code, Include Organization Code in Name, Organization Active, Availability Date*, Organization Visibility, External URL, Row ID* (Text), System ID, ID* (Text), Organization Subtype* (Organization_Subtype_ID), Organization Container+ (Organization_Reference_ID), Replace All, Row ID*, Worktag Type, Required On Transaction, Required On Transaction For Validation, Delete Default Value, Default Worktag, External Supplier Invoice Source, Replace All Allowed Values, Row ID*, Delete Allowed Value, Allowed Worktag, External Supplier Invoice Source. There is no column named “Organization Reference ID”. The task text does not give a subtype or a hierarchy.

  3. Your rows contain the literal placeholders <SUBTYPE_ID> and <HIERARCHY_ID>. I opened Maintain Organization Subtypes as you said: it lists 20 subtypes, including one named “Cost Center” (Organization Types: Cost Center, Cost Center Hierarchy), but its “Organization Subtype” column (the ID) is empty on screen for every row, so no ID is shown. Organization Subtype* is required in the template.

Turn 2: answer (2026-11-20T06:00:45.172Z, 43 s)

You’re right on all three points. Two of them were my mistakes:

  • “Upload File” was wrong. Attach File at Launch is the correct choice, so keep it.
  • Maintain Organization Subtypes was the wrong place for the ID. It lists subtypes by name and doesn’t show their reference IDs.

1. Find the subtype ID (the one value only your tenant has)

  1. In Maintain Organization Subtypes, find the Cost Center row.
  2. Open its related actions (the “...” or twinkie icon) → Integration IDs → View IDs.
  3. Copy the value listed against Organization_Subtype_ID. This value goes in the Organization Subtype* column.

It’s also worth checking that new cost centers should use this subtype. Open an existing cost center (Find Cost Centers → pick one) and look at its Organization Subtype. If it says “Cost Center”, you have the right one.

2. Hierarchy: leave it blank

Organization Container is optional, and your instructions don’t name a parent, so I wouldn’t guess. Leave the column blank. Once someone confirms where these cost centers belong, they can be added to the hierarchy afterwards.

3. Column-by-column mapping (v48 template, in your column order)

# Column Value
#1 ColumnSpreadsheet Key* Value1–8, one per row
#2 ColumnAdd Only ValueY
#3 ColumnCost Center (Cost_Center_Reference_ID) Valueblank. This column is only for updating existing cost centers
#4 ColumnEffective Date Value2026-01-01
#5 ColumnRestricted To Company… Valueblank
#6 ColumnID (Text) ValueThe cost center code. This is the reference ID I called “Organization Reference ID” before
#7 ColumnInclude Organization ID in Name Valueblank (only applies to supervisory orgs)
#8 ColumnOrganization Name ValueThe name
#9 ColumnPhonetic Name Valueblank
#10 ColumnOrganization Code ValueThe cost center code
#11 ColumnInclude Organization Code in Name ValueN
#12 ColumnOrganization Active ValueY
#13 ColumnAvailability Date* Value2026-01-01
#14–15 ColumnOrganization Visibility, External URL Valueblank
#16–18 ColumnRow ID*, System ID, ID* Valueblank. These are the optional integration ID group. Their asterisks only apply if you use that group
#19 ColumnOrganization Subtype* ValueThe ID from step 1
#20 ColumnOrganization Container+ Valueblank
#21–33 ColumnRelated worktags columns Valueblank

The eight rows, using columns 1–4, 6, 8 and 10–13. Put the subtype ID in column 19 on every row:

Key Add Only Eff. Date ID Organization Name Org Code Incl. Code Active Avail. Date
Key1 Add OnlyY Eff. Date2026-01-01 IDTT-CLA-4100 Organization NameField Marketing TT-CLA Org CodeTT-CLA-4100 Incl. CodeN ActiveY Avail. Date2026-01-01
Key2 Add OnlyY Eff. Date2026-01-01 IDTT-CLA-4110 Organization NamePartner Marketing TT-CLA Org CodeTT-CLA-4110 Incl. CodeN ActiveY Avail. Date2026-01-01
Key3 Add OnlyY Eff. Date2026-01-01 IDTT-CLA-4120 Organization NameProduct Marketing TT-CLA Org CodeTT-CLA-4120 Incl. CodeN ActiveY Avail. Date2026-01-01
Key4 Add OnlyY Eff. Date2026-01-01 IDTT-CLA-4200 Organization NameCustomer Success TT-CLA Org CodeTT-CLA-4200 Incl. CodeN ActiveY Avail. Date2026-01-01
Key5 Add OnlyY Eff. Date2026-01-01 IDTT-CLA-4210 Organization NameRenewals TT-CLA Org CodeTT-CLA-4210 Incl. CodeN ActiveY Avail. Date2026-01-01
Key6 Add OnlyY Eff. Date2026-01-01 IDTT-CLA-4300 Organization NameData Platform TT-CLA Org CodeTT-CLA-4300 Incl. CodeN ActiveY Avail. Date2026-01-01
Key7 Add OnlyY Eff. Date2026-01-01 IDTT-CLA-4310 Organization NameSecurity Engineering TT-CLA Org CodeTT-CLA-4310 Incl. CodeN ActiveY Avail. Date2026-01-01
Key8 Add OnlyY Eff. Date2026-01-01 IDTT-CLA-4320 Organization NameDeveloper Tools TT-CLA Org CodeTT-CLA-4320 Incl. CodeN ActiveY Avail. Date2026-01-01

Before you launch:

  • Formats: Enter booleans and dates in the formats shown in row 4. Check that Excel hasn’t turned the dates into a different format.
  • The year: You haven’t confirmed it yet. 2026-01-01 is backdated about 10 months. If these are meant for next year, change both date columns to 2027-01-01.
  • Test first: Run the load in a sandbox if you can. Then confirm all eight cost centers with Find Cost Centers.

If View IDs doesn’t show an Organization_Subtype_ID for the Cost Center subtype either, tell me exactly what you see and we’ll work out another way to get it.

Turn 3: follow-up (sent 2026-11-20T06:04:15.570Z)

Step 1 says: in Maintain Organization Subtypes, find the Cost Center row, open its related actions, then Integration IDs > View IDs. On screen the Cost Center row has these cells only: an empty first cell (other rows like Allocation Pool and Business Unit have a minus icon there, Cost Center has none), an empty “Organization Subtype” cell, a text box “Cost Center”, the Organization Types “Cost Center” and “Cost Center Hierarchy”, an unticked “Include In Display Name” box and Usage Count 34. I hovered every cell and pressed Alt+R with the Organization Subtype cell focused; no related-actions button or menu appears for the row, so I cannot reach Integration IDs > View IDs. The only related-actions buttons are on the Organization Type chips (“Cost Center”, “Cost Center Hierarchy”). No subtype ID is shown anywhere on the page.

Turn 3: answer (2026-11-20T06:04:36.656Z, 21.1 s)

That’s my mistake again. Maintain Organization Subtypes is an editable grid, and its rows don’t have related actions. Your screen does settle one question, though: Usage Count 34 means 34 existing organizations already use the “Cost Center” subtype, so it’s the right one. That’s probably also why its row has no minus (delete) icon, since subtypes in use usually can’t be deleted.

To get its ID, start from a cost center that already uses it.

Get the ID from an existing cost center

  1. Search for Find Cost Centers, run it, and open any active cost center.
  2. On its profile, find the Organization Subtype field. It should show “Cost Center”.
  3. Hover over “Cost Center” in that field and click its related-actions button (or press Alt+R with it focused).
  4. Choose Integration IDs → View IDs, and copy the value next to Organization_Subtype_ID.

Put that value in Organization Subtype* (column 19) on all eight rows.

If the subtype appears as plain text with no related-actions button, it may be under a tab such as Details or Organization Details, depending on your profile layout.

If that doesn’t work either

Build a quick custom report on the All Cost Centers data source. Add the Organization Subtype field, then add the subtype’s reference ID or integration ID field (pick it through the related business object). The exact field names vary by tenant, so look for “Reference ID” or “Integration IDs” under Organization Subtype. You’ll need report-writer access for this.

If neither option shows an ID, tell me what the cost center profile shows and we’ll take it from there.

Still open: the year. Both date columns say 2026-01-01, which is backdated about 10 months. Please confirm that’s what you want before you launch.