---
title: "Outbound integration, Kiweely Vine: the full transcript"
description: "Every turn of Kiweely Vine on the outbound integration task in Kiweely’s Workday tenant test, word for word with its times."
url: https://kiweely.com/tenant-test/transcripts/t8-kv
---

# T8 · KV · Kiweely Vine (Claude Opus 5.5, High)

The conversation as Vine shows it: the request and every message Vine wrote. Every action Vine took in Workday is in the full screen recording of the run.

**Tester (as the consultant)** (09:38:57 UTC)

Set up an outbound integration in our Workday tenant called “Worker Contacts TT-KV” that produces a CSV file of the active workers in the supervisory organization “HCM1119 IT”, with columns Employee ID, Legal Name, Work Email, Manager, Hire Date. Then launch it once so we get the file. Please set it up in our Development tenant.

**Kiweely Vine** (09:39:59 UTC)

I’ve set up a new project for Tenant Test called Worker Contacts TT-KV to keep this work in. Nothing has been built in Workday yet.

I’ll carry on in the next step: build the report and the outbound integration in your Development tenant, then run it once so you get the CSV file.

**Kiweely Vine** (09:41:51 UTC)

Getting ready to build: I’m checking Workday’s documentation on outbound integrations and custom reports before I start working in your Development tenant.

**Kiweely Vine** (09:42:25 UTC)

Still checking your Development tenant: I’m confirming that the HCM1119 IT organization exists and seeing who’s in it before I build anything.

**Kiweely Vine** (09:45:31 UTC)

I’m signed in to your Development tenant as Logan McNeil. A few similar “Worker Contacts” reports already exist there, so I’m checking how they were set up before I create yours.

**Kiweely Vine** (09:46:06 UTC)

I’ve started creating the report in the browser. It’s named “Worker Contacts TT-KV Report”, and I’m now setting its type and data source.

**Kiweely Vine** (09:46:17 UTC)

Report type is Advanced and the data source is “Workers for HCM Reporting”. I’m also turning on “Enable As Web Service”, which the integration needs so it can use the report.

**Kiweely Vine** (09:46:40 UTC)

The search box is focused. I’ll type into it.

**Kiweely Vine** (09:47:12 UTC)

The first column, Employee ID, is in. I’m now adding Legal Name, Work Email, Manager and Hire Date.

**Kiweely Vine** (09:47:45 UTC)

Employee ID and Legal Name are in. I’m adding the Work Email column now.

**Kiweely Vine** (09:47:53 UTC)

I’m using Workday’s “Email - Primary Work” field so each worker gets one work email address.

**Kiweely Vine** (09:48:39 UTC)

Three columns are in. I’m picking the right Manager field now: Workday has many fields with that name, and I’m looking for the one that gives each worker’s direct manager.

**Kiweely Vine** (09:48:54 UTC)

“Worker’s Manager” can hold several managers, which would make the CSV messy, so I’m using Workday’s single-value field for the manager’s name instead.

**Kiweely Vine** (09:49:44 UTC)

All five columns are entered. I’m checking them, then I’ll add the HCM1119 IT filter.

**Kiweely Vine** (09:49:52 UTC)

The columns are done. Next comes the Filter tab, so the report only includes HCM1119 IT.

**Kiweely Vine** (09:50:24 UTC)

I’ve added a filter row and I’m now setting it to “Supervisory Organization is HCM1119 IT”.

**Kiweely Vine** (09:51:04 UTC)

The filter is set to “Supervisory Organization - Primary Position, in the selection list”. Now I’m choosing HCM1119 IT as its value.

**Kiweely Vine** (09:51:18 UTC)

HCM1119 IT is selected. Next I’ll confirm web service is still on in the Advanced tab and read the alert before saving.

**Kiweely Vine** (09:52:04 UTC)

All three prompts are added with no default, so every active worker type is still included. Saving the report now.

**Kiweely Vine** (09:52:10 UTC)

Alert cleared and the save is processing.

**Kiweely Vine** (09:52:15 UTC)

The report “Worker Contacts TT-KV Report” is saved. Next I’ll check that it’s web-service enabled, then run it to confirm it returns the 19 workers.

**Kiweely Vine** (09:52:45 UTC)

The report ran but returned no rows, even though 19 active workers are in HCM1119 IT. I’m working out why before I build the integration on top of it.

**Kiweely Vine** (09:53:32 UTC)

The workers are in the data source, so the problem is the organization field I filtered on. Checking what that field holds for one of them.

**Kiweely Vine** (09:54:30 UTC)

Opening the report in Edit Custom Report so I can change the filter to the right organization field.

**Kiweely Vine** (09:55:27 UTC)

Still working on the report filter. Workday’s field search doesn’t list the plain “Supervisory Organization” field, so I’m finding another way to filter on HCM1119 IT.

**Kiweely Vine** (09:56:01 UTC)

I’m browsing Workday’s field categories for the plain “Supervisory Organization” field, since it doesn’t come up in search.

**Kiweely Vine** (09:56:41 UTC)

I’m in the Organization category of the field list and scrolling to find “Supervisory Organization”.

**Kiweely Vine** (09:57:48 UTC)

It’s a single-select list, so I’ll pick “Workers for all Organizations” directly.

**Kiweely Vine** (09:58:06 UTC)

All the prompts are listed now. Next I’ll set the defaults: Organizations by Type = HCM1119 IT, and Active = Yes.

**Kiweely Vine** (09:58:29 UTC)

The Organizations by Type row is active. Opening its Default Type list.

**Kiweely Vine** (09:59:01 UTC)

HCM1119 IT is set as the default organization. Next is the Active row.

**Kiweely Vine** (09:59:38 UTC)

Still on the Prompts tab: HCM1119 IT is the default organization, and now I’m setting Active to Yes.

**Kiweely Vine** (10:00:09 UTC)

Active is set to Yes. Saving the report now.

**Kiweely Vine** (10:00:18 UTC)

Saved with no errors. Running it to check the output.

**Kiweely Vine** (10:00:33 UTC)

The report now returns all 19 workers with the five columns. Work Email is blank because none of them has one in Workday. Next I’m creating the outbound integration with Create EIB.

**Kiweely Vine** (10:01:34 UTC)

This is Workday’s step-by-step Create Outbound EIB wizard. The name and ID are filled in, so I’m moving to the next step.

**Kiweely Vine** (10:01:57 UTC)

The data source is the new report. Moving to the next step.

**Kiweely Vine** (10:02:04 UTC)

I’m on the Transform step, where I’ll choose a CSV output.

**Kiweely Vine** (10:02:34 UTC)

There’s no CSV transformation for this report yet, so I’ll use “New Custom Report Transformation” to create one inside the wizard.

**Kiweely Vine** (10:03:30 UTC)

Review page: a new report transformation was created automatically. After I submit, I’ll check its output format and set it to CSV. Submitting now.

**Kiweely Vine** (10:03:38 UTC)

The integration system “Worker Contacts TT-KV” is created. Opening its transformation to check the output format.

**Kiweely Vine** (10:03:58 UTC)

This view doesn’t show the format, so I’m opening Edit Custom Report Transformation.

**Kiweely Vine** (10:04:49 UTC)

This form has no output format setting. In Workday the format is set on the integration itself, so I’m closing this without changes and going to the integration’s own actions.

**Kiweely Vine** (10:05:33 UTC)

The integration “Worker Contacts TT-KV” is created. Next I’m opening Enterprise Interface, then Configure Transformation, to set the output to CSV.

**Kiweely Vine** (10:05:56 UTC)

The transformation is already a comma-separated file, with one column for each report field and values in quotes. I’m checking the Header tab to make sure the file starts with a row of column names.

**Kiweely Vine** (10:06:07 UTC)

The header row is on. I’m checking that all five columns are listed.

**Kiweely Vine** (10:06:15 UTC)

All five columns are there in the right order. Saving the configuration.

**Kiweely Vine** (10:06:23 UTC)

The CSV setup is saved. Next I’m launching the integration with Launch / Schedule Integration, set to Run Now.

**Kiweely Vine** (10:07:00 UTC)

The launch screen lists the report’s prompts. I’m checking that HCM1119 IT and Active came through as the values.

**Kiweely Vine** (10:07:13 UTC)

The launch screen doesn’t pick up the report’s defaults; Organizations by Type and Active show no values. I’ll enter HCM1119 IT and Active here for this run.

**Kiweely Vine** (10:07:34 UTC)

HCM1119 IT is set. Now I’m ticking Active.

**Kiweely Vine** (10:07:52 UTC)

HCM1119 IT and Active are both set. Launching the integration now.

**Kiweely Vine** (10:08:03 UTC)

The integration is running. Workday shows it as Processing, and I’ll refresh until it finishes.

**Kiweely Vine** (10:08:26 UTC)

The run finished: Workday reports “Interface completed successfully!” and one output file. Downloading the CSV now.

**Kiweely Vine** (10:12:23 UTC)

The file “Worker\_Contacts\_TT-KV.csv” is on the completed run in Workday. I’m downloading it into the project now.

**Kiweely Vine** (10:13:10 UTC)

The integration’s View Integration System page is open in the browser. Now I’m writing the project record: what was asked for, exactly how it was built, and the check I ran.

**Kiweely Vine** (10:13:47 UTC)

Now the Testing panel record.

**Kiweely Vine** (10:14:20 UTC)

I’ve set up the “Worker Contacts TT-KV” integration in your Development tenant and ran it once. The run completed successfully, and the CSV has a header row plus all 19 active workers in HCM1119 IT. I checked that count against a direct read of the organization in Workday, and both checks passed.

The columns are Employee ID, Legal Name, Work Email, Manager and Hire Date. The integration pulls its data from a new report, “Worker Contacts TT-KV Report”. It’s the only other thing I created, along with the CSV format setting Workday adds when you make an integration. The integration’s page is open in the browser.

-   **Work Email is empty** in every row, because none of these 19 workers has a work email in Workday.
-   **Hire Date has a time-zone suffix**, for example “2026-11-19-08:00”. I can switch it to a plain date if the system receiving the file needs that.
-   **Each launch needs the organization entered.** Workday’s launch screen doesn’t fill it in from the report’s defaults, so you’ll need to pick HCM1119 IT and tick Active when you launch it.
-   **The file stays in Workday for 1 day**, because no destination was given. To keep a copy, download it from the run’s output files or use the copy I saved. Workday can also send it to an SFTP server or by email instead.

The steps to rebuild this in another tenant are in `C:\Users\customer\Documents\Kiweely Vine\worker-contacts-tt-kv\.knokit\Context\Deployment\Build record.md`, and your request is written up in `C:\Users\customer\Documents\Kiweely Vine\worker-contacts-tt-kv\.knokit\Context\Requirements\Worker contacts integration.md`. The checks are in the Testing panel.

Files are in C:\\Users\\customer\\Documents\\Kiweely Vine\\worker-contacts-tt-kv.knokit\\Context:

-   Integration output\\Worker\_Contacts\_TT-KV.csv
