---
title: "EIB load, Claude: the full transcript — Kiweely"
description: "Every turn of Claude on the eib load task in Kiweely’s Workday tenant test, word for word with its times."
url: https://kiweely.com/tenant-test/transcripts/t3-cl
---

# T3 · CL · Claude: Anthropic Claude Opus 5.5 (effort high) via Claude Code CLI

## Turn 1: prompt (sent 2026-11-20T04:47:55.306Z)

We need to load these new cost centers into our Workday tenant with an EIB, effective 1 January 2026. Each one should be active. Please give me what I need to do the load.

| Cost Center Code | Name |
| --- | --- |
| TT-CLA-4100 | Field Marketing TT-CLA |
| TT-CLA-4110 | Partner Marketing TT-CLA |
| TT-CLA-4120 | Product Marketing TT-CLA |
| TT-CLA-4200 | Customer Success TT-CLA |
| TT-CLA-4210 | Renewals TT-CLA |
| TT-CLA-4300 | Data Platform TT-CLA |
| TT-CLA-4310 | Security Engineering TT-CLA |
| TT-CLA-4320 | Developer Tools TT-CLA |

## Turn 1: answer (2026-11-20T04:48:50.215Z, 54.9 s)

I can give you most of the load file. Two things need your attention first, and there are two values only your tenant can supply.

## Check before loading

**1\. 1 January 2026 is about 10 months in the past.** Today is 19 November 2026, so this load would be backdated. Workday will accept that. But if these cost centers are meant for the next fiscal year, you probably want **2027-01-01**. Please confirm the year before you launch. The file below uses 2026-01-01 as you asked.

**2\. Two tenant values are missing:**

-   **Organization Subtype (required).** The load will fail without it. Look up the ID with *Maintain Organization Subtypes*, or check an existing cost center in your tenant. The ID type is usually `Organization_Subtype_ID`.
-   **Cost center hierarchy (optional, but usually needed).** This is the parent each cost center rolls up to. If you leave it blank, the cost centers are created outside any hierarchy and won’t show up in hierarchy-based reports or security.

## EIB setup

1.  Search for **Create EIB**. Set the source to *Upload File* and the target to *Web Service* → **Financial Management** → **Put Cost Center**.
2.  Click **Generate Spreadsheet Template** and fill in the Put Cost Center tab with the values below.
3.  Run it in a sandbox first. Then launch it in production and check the cost centers with *Find Cost Centers*.

## Values

| Field | Value |
| --- | --- |
| Add Only |  **Y**. If a reference ID already exists, the row fails instead of overwriting that cost center |
| Effective Date | 2026-01-01 |
| Organization Reference ID | The cost center code |
| Organization Name | The name from your table |
| Organization Code | The cost center code |
| Include Organization Code in Name |  **N**. Your names already end in “TT-CLA”, so Y would display as e.g. “TT-CLA-4100 Field Marketing TT-CLA” |
| Organization Active |  **Y** |
| Availability Date | 2026-01-01 |
| Organization Visibility | Leave blank. Top-level cost centers default to Everyone, and child cost centers inherit visibility from their hierarchy |
| Organization Subtype | `<SUBTYPE_ID>` |
| Organization Container | `<HIERARCHY_ID>` or blank |

Here are the rows as CSV, so you can paste them into the template and match them to its columns:

csv

```
Spreadsheet Key,Add Only,Effective Date,Organization Reference ID,Organization Name,Organization Code,Include Organization Code in Name,Organization Active,Availability Date,Organization Subtype,Organization Container
1,Y,2026-01-01,TT-CLA-4100,Field Marketing TT-CLA,TT-CLA-4100,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>
2,Y,2026-01-01,TT-CLA-4110,Partner Marketing TT-CLA,TT-CLA-4110,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>
3,Y,2026-01-01,TT-CLA-4120,Product Marketing TT-CLA,TT-CLA-4120,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>
4,Y,2026-01-01,TT-CLA-4200,Customer Success TT-CLA,TT-CLA-4200,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>
5,Y,2026-01-01,TT-CLA-4210,Renewals TT-CLA,TT-CLA-4210,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>
6,Y,2026-01-01,TT-CLA-4300,Data Platform TT-CLA,TT-CLA-4300,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>
7,Y,2026-01-01,TT-CLA-4310,Security Engineering TT-CLA,TT-CLA-4310,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>
8,Y,2026-01-01,TT-CLA-4320,Developer Tools TT-CLA,TT-CLA-4320,N,Y,2026-01-01,<SUBTYPE_ID>,<HIERARCHY_ID>
```

**Notes:**

-   **Column names:** Workday’s generated template uses its own column headers and order. Match the values by field name rather than pasting the header row.
-   **Reference IDs:** I used each cost center code as its reference ID. If your tenant uses a different pattern, like `CC_TT-CLA-4100`, change that column.
-   **Hierarchy:** These look like three groups: Marketing (41xx), Customer Success (42xx) and Engineering (43xx). If they go under different parents, each row will need a different hierarchy ID.
-   **Company restrictions:** If your cost centers are normally limited to particular companies, fill in *Restricted to Company or Company Hierarchy*. I left it blank.

Send me the subtype ID, the hierarchy ID(s), and the confirmed year, and I’ll give you the finished rows.

Sources:

-   [Workday API: Put\_Cost\_Center (Financial Management v45.0)](https://community.workday.com/sites/default/files/file-hosting/productionapi/Financial_Management/v45.0/Put_Cost_Center.html)

## Turn 2: follow-up (sent 2026-11-20T06:00:02.211Z)

I followed your steps up to the spreadsheet and cannot continue. What I see:

1.  The Create EIB wizard has no “Upload File” source; Retrieval Method offers Amazon Simple Storage Service, Attach File at Launch (default), FTP/SSL, Google Drive, REST URL, SFTP. I kept Attach File at Launch, with Put Cost Center (Web Service) as the operation (v48.0).
    
2.  The generated Put Cost Center template has one sheet, “Cost Center”, with these columns in order (row 5 headers, row 4 formats): Spreadsheet Key\*, Add Only, Cost Center (Cost\_Center\_Reference\_ID), Effective Date, Restricted To Company or Company Hierarchy+, ID (Text), Include Organization ID in Name, Organization Name, Phonetic Name, Organization Code, Include Organization Code in Name, Organization Active, Availability Date\*, Organization Visibility, External URL, Row ID\* (Text), System ID, ID\* (Text), Organization Subtype\* (Organization\_Subtype\_ID), Organization Container+ (Organization\_Reference\_ID), Replace All, Row ID\*, Worktag Type, Required On Transaction, Required On Transaction For Validation, Delete Default Value, Default Worktag, External Supplier Invoice Source, Replace All Allowed Values, Row ID\*, Delete Allowed Value, Allowed Worktag, External Supplier Invoice Source. There is no column named “Organization Reference ID”. The task text does not give a subtype or a hierarchy.
    
3.  Your rows contain the literal placeholders <SUBTYPE\_ID> and <HIERARCHY\_ID>. I opened Maintain Organization Subtypes as you said: it lists 20 subtypes, including one named “Cost Center” (Organization Types: Cost Center, Cost Center Hierarchy), but its “Organization Subtype” column (the ID) is empty on screen for every row, so no ID is shown. Organization Subtype\* is required in the template.
    

## Turn 2: answer (2026-11-20T06:00:45.172Z, 43 s)

You’re right on all three points. Two of them were my mistakes:

-   **“Upload File”** was wrong. **Attach File at Launch** is the correct choice, so keep it.
-   **Maintain Organization Subtypes** was the wrong place for the ID. It lists subtypes by name and doesn’t show their reference IDs.

## 1\. Find the subtype ID (the one value only your tenant has)

1.  In **Maintain Organization Subtypes**, find the **Cost Center** row.
2.  Open its related actions (the “...” or twinkie icon) → **Integration IDs** → **View IDs**.
3.  Copy the value listed against **Organization\_Subtype\_ID**. This value goes in the Organization Subtype\* column.

It’s also worth checking that new cost centers should use this subtype. Open an existing cost center (**Find Cost Centers** → pick one) and look at its Organization Subtype. If it says “Cost Center”, you have the right one.

## 2\. Hierarchy: leave it blank

Organization Container is optional, and your instructions don’t name a parent, so I wouldn’t guess. Leave the column blank. Once someone confirms where these cost centers belong, they can be added to the hierarchy afterwards.

## 3\. Column-by-column mapping (v48 template, in your column order)

| # | Column | Value |
| --- | --- | --- |
| 1 | Spreadsheet Key\* | 1–8, one per row |
| 2 | Add Only | Y |
| 3 | Cost Center (Cost\_Center\_Reference\_ID) |  **blank**. This column is only for updating existing cost centers |
| 4 | Effective Date | 2026-01-01 |
| 5 | Restricted To Company… | blank |
| 6 |  **ID (Text)** | The cost center code. This is the reference ID I called “Organization Reference ID” before |
| 7 | Include Organization ID in Name | blank (only applies to supervisory orgs) |
| 8 | Organization Name | The name |
| 9 | Phonetic Name | blank |
| 10 | Organization Code | The cost center code |
| 11 | Include Organization Code in Name | N |
| 12 | Organization Active | Y |
| 13 | Availability Date\* | 2026-01-01 |
| 14–15 | Organization Visibility, External URL | blank |
| 16–18 | Row ID\*, System ID, ID\* |  **blank**. These are the optional integration ID group. Their asterisks only apply if you use that group |
| 19 | Organization Subtype\* | The ID from step 1 |
| 20 | Organization Container+ | blank |
| 21–33 | Related worktags columns | blank |

The eight rows, using columns 1–4, 6, 8 and 10–13. Put the subtype ID in column 19 on every row:

| Key | Add Only | Eff. Date | ID | Organization Name | Org Code | Incl. Code | Active | Avail. Date |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| 1 | Y | 2026-01-01 | TT-CLA-4100 | Field Marketing TT-CLA | TT-CLA-4100 | N | Y | 2026-01-01 |
| 2 | Y | 2026-01-01 | TT-CLA-4110 | Partner Marketing TT-CLA | TT-CLA-4110 | N | Y | 2026-01-01 |
| 3 | Y | 2026-01-01 | TT-CLA-4120 | Product Marketing TT-CLA | TT-CLA-4120 | N | Y | 2026-01-01 |
| 4 | Y | 2026-01-01 | TT-CLA-4200 | Customer Success TT-CLA | TT-CLA-4200 | N | Y | 2026-01-01 |
| 5 | Y | 2026-01-01 | TT-CLA-4210 | Renewals TT-CLA | TT-CLA-4210 | N | Y | 2026-01-01 |
| 6 | Y | 2026-01-01 | TT-CLA-4300 | Data Platform TT-CLA | TT-CLA-4300 | N | Y | 2026-01-01 |
| 7 | Y | 2026-01-01 | TT-CLA-4310 | Security Engineering TT-CLA | TT-CLA-4310 | N | Y | 2026-01-01 |
| 8 | Y | 2026-01-01 | TT-CLA-4320 | Developer Tools TT-CLA | TT-CLA-4320 | N | Y | 2026-01-01 |

**Before you launch:**

-   **Formats:** Enter booleans and dates in the formats shown in row 4. Check that Excel hasn’t turned the dates into a different format.
-   **The year:** You haven’t confirmed it yet. 2026-01-01 is backdated about 10 months. If these are meant for next year, change both date columns to 2027-01-01.
-   **Test first:** Run the load in a sandbox if you can. Then confirm all eight cost centers with **Find Cost Centers**.

If **View IDs** doesn’t show an Organization\_Subtype\_ID for the Cost Center subtype either, tell me exactly what you see and we’ll work out another way to get it.

## Turn 3: follow-up (sent 2026-11-20T06:04:15.570Z)

Step 1 says: in Maintain Organization Subtypes, find the Cost Center row, open its related actions, then Integration IDs > View IDs. On screen the Cost Center row has these cells only: an empty first cell (other rows like Allocation Pool and Business Unit have a minus icon there, Cost Center has none), an empty “Organization Subtype” cell, a text box “Cost Center”, the Organization Types “Cost Center” and “Cost Center Hierarchy”, an unticked “Include In Display Name” box and Usage Count 34. I hovered every cell and pressed Alt+R with the Organization Subtype cell focused; no related-actions button or menu appears for the row, so I cannot reach Integration IDs > View IDs. The only related-actions buttons are on the Organization Type chips (“Cost Center”, “Cost Center Hierarchy”). No subtype ID is shown anywhere on the page.

## Turn 3: answer (2026-11-20T06:04:36.656Z, 21.1 s)

That’s my mistake again. Maintain Organization Subtypes is an editable grid, and its rows don’t have related actions. Your screen does settle one question, though: **Usage Count 34** means 34 existing organizations already use the “Cost Center” subtype, so it’s the right one. That’s probably also why its row has no minus (delete) icon, since subtypes in use usually can’t be deleted.

To get its ID, start from a cost center that already uses it.

## Get the ID from an existing cost center

1.  Search for **Find Cost Centers**, run it, and open any active cost center.
2.  On its profile, find the **Organization Subtype** field. It should show “Cost Center”.
3.  Hover over “Cost Center” in that field and click its related-actions button (or press Alt+R with it focused).
4.  Choose **Integration IDs** → **View IDs**, and copy the value next to **Organization\_Subtype\_ID**.

Put that value in **Organization Subtype**\* (column 19) on all eight rows.

If the subtype appears as plain text with no related-actions button, it may be under a tab such as *Details* or *Organization Details*, depending on your profile layout.

## If that doesn’t work either

Build a quick custom report on the **All Cost Centers** data source. Add the **Organization Subtype** field, then add the subtype’s reference ID or integration ID field (pick it through the related business object). The exact field names vary by tenant, so look for “Reference ID” or “Integration IDs” under Organization Subtype. You’ll need report-writer access for this.

If neither option shows an ID, tell me what the cost center profile shows and we’ll take it from there.

**Still open:** the year. Both date columns say 2026-01-01, which is backdated about 10 months. Please confirm that’s what you want before you launch.
