---
title: "Workday Dashboard or Worklet Not Visible to a Security Group"
description: "Why a Workday security group still can't see a custom dashboard or worklet after you grant permission: domain, report sharing, Required for Groups and data…"
url: https://kiweely.com/guides/workday-worklet-dashboard-not-visible-security
---

# Why Can’t a Security Group See a Workday Dashboard or Worklet After You Added Permission?

A Workday dashboard worklet only appears when four separate gates agree: the dashboard’s domain, the report’s Share tab, the worklet row on Maintain Dashboards, and the report data source security. Granting one of them, usually the domain, leaves the other three closed.

-   **Checked** against Workday on November 13
-   Applies to **Workday Security**
-   6 min read
-   Published November 13
-   By Kiweely

A security group can’t see a Workday dashboard or worklet after you grant permission because Workday checks four separate things, and the domain policy you edited is only one of them. The dashboard needs a domain the group holds, the custom report behind the worklet must be shared with the group, the worklet row on **Maintain Dashboards** must list the group under **Required for Groups**, and the group still needs access to the report’s data source, filter and fields.

The usual pattern: an admin adds HR Partner to the dashboard’s domain, runs **Activate Pending Security Policy Changes**, and the dashboard tile appears, but it is empty. Or the worklet appears with blank columns. Each symptom points to a different gate.

## Which security layers decide whether a dashboard worklet appears?

Work through the layers in the order Workday evaluates them. A miss at any layer hides everything below it.

| Layer | Where it is configured | Symptom when it fails | What to check |
| --- | --- | --- | --- |
| Dashboard domain |  **Domains** prompt on **Create Custom Dashboard**, then the domain’s security policy | Dashboard does not appear at all |  **View Security for Securable Item** on the dashboard’s domain; confirm the policy change was activated |
| Report sharing | Share tab on **Edit Custom Report** | Dashboard opens, worklet is missing | Report is shared with the group, not with named users |
| Worklet enablement | Output tab, **Enable as Worklet** and **Available On** | Worklet cannot be selected on the dashboard | The dashboard is selected in **Available On** |
| Dashboard content |  **Maintain Dashboards** > Edit > Content tab | Worklet missing for one group but visible to others |  **Required for Groups** includes the group; no error in **Invalid Landing Page Admin Configuration** |
| Data security | Domains securing the data source, filter and fields | Worklet shows, but rows or columns are blank |  **Data Sources** report and field-level domains |
| Membership | Role assignment, user-based or rule-based group | Works for the tester, not for the user who complained |  **View Security Groups for User** for the affected worker |

## Why doesn’t adding the group to the domain make the dashboard appear?

A custom dashboard is secured by the domains you pick in the **Domains** prompt when you run **Create Custom Dashboard**. Those can be Workday-delivered domains or custom domains you create for the purpose. Workday’s setup steps for dashboards and landing pages say to grant the security group permission on that domain’s policy and then activate the pending security policy changes. Skip the activation and nothing changes.

Three things go wrong here more often than people expect:

1.  **The wrong domain.** The admin edits a domain that sounds right, but the dashboard was built against a different one. Open the dashboard from **Maintain Dashboards** and read the domain list instead of guessing.
2.  **Unactivated changes.** The edit sits in pending state. Check the timestamp of the last activation against the time of the edit.
3.  **Membership.** The group has access, but the user is not in the group on today’s date. Role-based groups follow role assignments on organizations, so a manager assigned to a different supervisory org won’t pick up the access. Run **View Security Groups for User** for the exact worker, not for yourself.

Setting up the dashboard and its worklets in the first place sits behind the **Set Up: Tenant Setup - Worklets** domain in the System functional area. That domain governs who can configure dashboards, not who can view them.

## Why is the worklet missing when the user can open the dashboard?

This is the most common version of the problem, and the answer is almost always report sharing. A custom report becomes a worklet through the Output tab: select **Enable as Worklet**, then pick the dashboard in **Available On**. Workday’s own steps add a condition that is easy to miss: you must share the report with the security groups that use the dashboard before you can add it as a worklet.

The Share tab offers three choices, and each behaves differently on a dashboard:

Fails

```
Share tab: Share with specific authorized groups and users
  Users: Jane Partner, Raj Partner
Result: report runs for those two people, but cannot be added
        to a dashboard as a worklet
```

Works

```
Share tab: Share with specific authorized groups and users
  Groups: HR Partner (role-based, constrained)
Maintain Dashboards > Content > worklet row
  Required for Groups: HR Partner
Result: worklet appears for every HR Partner on the dashboard tab
```

Next, open **Maintain Dashboards**, click Edit on the dashboard, and look at the worklet row on the Content tab. **Required for Groups** shows only the security groups that can access the report definition. If your group is not in the picker, the report is not shared with it, so go back to the report. Workday also shows an **Invalid Landing Page Admin Configuration** message on that row when the dashboard’s domain and the worklet’s sharing don’t agree, and a **Fix** button that resolves the group conflict. A blank column there is a good sign; a message means the two layers disagree.

Only the first six worklets render on a tab

A dashboard tab holds up to six worklets, and Workday displays the first six in the order of the Worklets list. If someone added a seventh, it will never render, whatever the security says.

Two more checks on the tab itself. If the tab has a **Prompt Set**, you can’t add optional worklets to it, so a worklet you meant as optional won’t be offered. And if the worklet is optional and **Configurable By User** is on, the user may simply have removed it. Required worklets can’t be removed by users, so making it required settles that question.

## Why does the worklet show up empty or with missing columns?

Once the worklet renders, normal report security takes over. Workday secures every report data source, data source filter and report field through a domain, and those can be different domains. Sharing never overrides that: Workday’s report security concept states that sharing a report does not grant access to data, and the person you share with may see different data from you.

So an empty worklet usually means one of these:

-   **Data source or filter access.** The group can reach the data source but not the filter used in the report. The **Data Sources** report shows which security groups can access each data source and filter.
-   **Field domains.** Columns from a domain the group lacks come back blank while the rest of the row fills in.
-   **Constrained scope.** A constrained group sees only workers in its own organizations. An HR Partner on one org sees nothing on a worklet filtered to another org.
-   **Prompts.** A required prompt without a default stops the worklet from showing results on load. Workday recommends **Do Not Prompt at Runtime** with default values for required prompts on worklets.

For field-by-field tracing, see [why a user cannot see a field or task](https://kiweely.com/guides/workday-user-cannot-see-field-task) and [why a shared custom report comes back empty](https://kiweely.com/guides/workday-custom-report-sharing-security-empty).

## How do you prove the fix for one affected user?

Don’t sign off from your own account. Admin accounts usually sit in groups that mask the problem. Prove it from the affected user’s point of view:

1.  Run **View Security Groups for User** for the worker who reported the issue and note the exact group that should grant access.
2.  Run **View Security for Securable Item** on the dashboard’s domain and confirm that group is listed.
3.  On **Edit Custom Report**, confirm the Share tab lists the same group.
4.  On **Maintain Dashboards**, confirm the worklet row lists the group in **Required for Groups** and shows no configuration error.
5.  Start a proxy session as that worker (or a test worker in the same role and org), open the dashboard, and compare the worklet to the same report run directly.

Check the **Refresh Data** setting in Worklet Options before declaring failure. With **Every Sign In**, Workday keeps the worklet data cached for the session, so a user who stayed signed in through your fix still sees the old result.

Kiweely Vine runs these checks against the live tenant: it reads the dashboard’s domains, the report’s Share tab and the worklet rows, then opens the dashboard as a real persona in a visible browser so you can see what the user sees. Its [persona testing approach](https://kiweely.com/guides/workday-multi-persona-proxy-testing) and [security tracing walkthrough](https://kiweely.com/blog/tracing-workday-security-permissions-with-an-ai-agent) show how it works.

## Frequently asked questions

### I added the security group to the dashboard domain. Why can users open the dashboard but not see my worklet?

The dashboard domain only controls access to the dashboard itself. The worklet is a custom report, so the report must be shared with that group on the Share tab, and the group must be listed under Required for Groups on the worklet row in Maintain Dashboards.

### Why is my security group missing from the Required for Groups list on Maintain Dashboards?

Workday only lists security groups that can access the report definition behind the worklet. Share the report with the group on Edit Custom Report first. If the group cannot be selected on the Share tab, it lacks access to the report data source or data source filter.

### Can I share a worklet report with individual users instead of a security group?

You can share the report, but Workday will not let you add a report shared with specific users as a worklet on a dashboard, and a setup administrator cannot add it as a required or recommended landing page worklet. Share with security groups instead.

### Why does the worklet appear for the user but show old data after a fix?

Check the Refresh Data option in the report's Worklet Options. With Every Sign In, Workday caches the worklet data for the session, so the user needs to sign out and back in before the worklet reloads.

## Sources checked

-   [Steps: Set Up Custom Dashboards](https://doc.workday.com/admin-guide/en-us/reporting-and-analytics/custom-reports-and-analytics/worklets-and-dashboards/vnn1487272847075.html)
-   [Create Custom Dashboards](https://doc.workday.com/admin-guide/en-us/reporting-and-analytics/custom-reports-and-analytics/worklets-and-dashboards/fou1540591802559.html)
-   [Configure Dashboard Content](https://doc.workday.com/admin-guide/en-us/reporting-and-analytics/custom-reports-and-analytics/worklets-and-dashboards/fwx1485390779961.html)
-   [Concept: Custom Worklets](https://doc.workday.com/admin-guide/en-us/reporting-and-analytics/custom-reports-and-analytics/worklets-and-dashboards/dan1370796457916.html)
-   [Set Up Share Options for Custom Reports](https://doc.workday.com/admin-guide/en-us/reporting-and-analytics/custom-reports-and-analytics/set-up-reports/gth1496859316438.html)
-   [Concept: Report Security](https://doc.workday.com/admin-guide/en-us/reporting-and-analytics/workday-reporting-concepts/dan1370797778178.html)
-   [Steps: Set Up Dashboards and Landing Pages](https://doc.workday.com/admin-guide/en-us/manage-workday/tenant-configuration/navigation/tar1423086679639.html)

## Related guides

[All guides](https://kiweely.com/guides)

-   [### Why does a shared Workday report show blank columns or fewer rows to another user? Because sharing a report does not override report security. Each user sees results based on their own access to the data source, the data source filter and every report field, so one report can show blanks, zeros or fewer rows.](https://kiweely.com/guides/workday-custom-report-sharing-security-empty)
-   [### Workday Domain Security vs. Business Process Security Policies: Which Controls What A domain security policy controls View/Modify (and Get/Put) access to reports, report fields, setup tasks and web services. A business process security policy controls who can start, approve, cancel, rescind or view a transaction. Both need activation.](https://kiweely.com/guides/workday-domain-vs-business-process-security-policies)
-   [### Multi-Persona Testing in Workday: Verifying the Proxy Chain in Sandbox Step through the multi-persona proxy testing sequence in Workday Sandbox. Verify role handoffs, condition rule evaluation, and field writebacks across each approval tier.](https://kiweely.com/guides/workday-multi-persona-proxy-testing)
-   [### Constrained vs unconstrained security groups in Workday: which workers can a member see? An unconstrained group gives members access to every worker in the tenant for the secured item. A constrained group limits them to the organizations they are assigned to, such as an HR Partner for one supervisory organization.](https://kiweely.com/guides/workday-constrained-vs-unconstrained-security-groups)
-   [### Why a Workday user can’t see a field, report, or task Find the domain that secures the item, compare the two users’ security groups against it, and check for a pending security policy change before assuming the setup is wrong.](https://kiweely.com/guides/workday-user-cannot-see-field-task)

### More guides on Business processes and security

[All 27 guides](https://kiweely.com/guides#business-processes)

-   [What does rescinded mean in Workday? Rescind vs cancel vs correct, and when each applies](https://kiweely.com/guides/workday-business-process-rescind-cancel-correct)
-   [Workday custom validations and condition rules: block bad data with Critical or Warning severity](https://kiweely.com/guides/workday-custom-validations-condition-rules)
-   [Workday Role-Based, User-Based, Intersection, and Aggregation Security Groups](https://kiweely.com/guides/workday-role-based-user-based-intersection-security-groups)
-   [Workday Business Process Advanced Routing: Exclude Initiator, Prior Approvers, and Alternates](https://kiweely.com/guides/workday-business-process-routing-mutual-exclusion)
-   [Workday Awaiting Action: who is the step waiting on, and how do you move it?](https://kiweely.com/guides/business-process-awaiting-action)
-   [My Workday business process condition rule is not working and the step did not fire: how to troubleshoot it](https://kiweely.com/guides/condition-rule-not-working)
-   [Configuration Change Tracker Restricted vs Global auditor and packager](https://kiweely.com/guides/workday-cct-restricted-vs-global-packager-security)
-   [Test Rule says Yes but the Workday BP step still skips: processing-user security](https://kiweely.com/guides/workday-test-rule-vs-processing-user-security)

### From the blog on Business processes and security

[All posts](https://kiweely.com/blog)

-   [Why Workday Business Processes Stall: The 5 Most Overlooked Routing Glitches](https://kiweely.com/blog/why-workday-business-processes-stall)
-   [Keeping External Workday Screens in Sync When You Change Absence Plans or Approval Rules](https://kiweely.com/blog/updating-custom-workday-screens-when-business-processes-change)
-   [Two Phone Apps, Two Jobs: Kiweely Companion for Admins vs. Kiweely Leaf for Employees](https://kiweely.com/blog/kiweely-phone-app-vs-kiweely-leaf-phone-app-explained)

## Let Workday check the work.

Kiweely writes WQL and builds orchestrations in your own tenant, and Workday, not Kiweely, says whether they passed.

[Start for free](https://kiweely.com/download) [See how it works](https://kiweely.com/vine/how-it-works)

## Get the next guide in your inbox.

One email a month with new guides and one Extend tip. Nothing else.
