---
title: "Test a Workday Extend App Before Production: Plan — Kiweely"
description: "A test plan for Workday Extend apps: App Preview, Development, Implementation and Sandbox, the promotion deadline, and what Workday does not let you undo."
url: https://kiweely.com/guides/workday-extend-testing
---

# How should I test a Workday Extend app before promoting it to production?

Test in the order Workday promotes: App Preview and mock data, a Development tenant, Implementation for QA, then Sandbox with production data for acceptance. Promote to Production only after each stage has recorded evidence, because installed apps cannot be removed.

-   **Checked** against Workday on November 16
-   Applies to **Workday Extend apps, App Hub promotion levels**
-   7 min read
-   Published September 19
-   By Kiweely

Test a Workday Extend app in the same order Workday promotes it: App Preview with mock data, a Development tenant, an Implementation tenant for QA, then a Sandbox tenant, which Workday refreshes weekly with production data, for user acceptance. Move to Production only when each stage has recorded evidence, because an app installed on Implementation, Sandbox or Production cannot be removed from that tenant.

## Which environments does a Workday Extend app go through?

Workday’s lifecycle has four phases, each tied to a promotion level and to the tenant where that level can run.

| Phase | Promotion level | What Workday says it is for |
| --- | --- | --- |
| Build | Development | Deploy and update code continuously on a WCP Development tenant |
| Test | Implementation | Install, configure and test on Implementation or Implementation Preview tenants |
| Verify | Sandbox | Install, configure and test on Sandbox or Sandbox Preview tenants |
| Release | Production | Your Account Administrator installs and configures the app on Production tenants |

Uploading source to App Hub compiles it into a build that can be promoted. Promoting to Implementation takes “the most recent passing build of the latest Development version” and replaces the existing Implementation version. Promoting to Sandbox takes the latest Implementation version and replaces the Sandbox one. Sandbox and Sandbox Preview are refreshed every week with production data, which is why Workday calls Sandbox the best place to find problems with your code before Production.

Promote from the Promotions tab of the app on the Workday Developer Site, or with `wdcli app promote <appRefId> --level implementation`. The CLI follows the same guidelines and deadlines as the site.

## What can App Preview and mock data prove?

App Preview shows a page without deploying it, which is quick for page logic and layout. It has documented limits:

-   It supports only the UTC time zone, en-US language and en\_US locale.
-   Without a tenant connection, `securityDomains` on a page are ignored, endpoint `authType` is ignored, and translations show English only.
-   Endpoints that use `authType` OAuth2 need mock data, because tenant connection does not support that type.
-   Connected to a Development or Implementation tenant, the app runs every inbound and outbound call, which “might update data in your tenant or other systems.”
-   If the page uses model endpoints, the model components must already be deployed to that tenant before App Preview shows data.

Mock data maps an endpoint in a PMD to a response, so you can test different response shapes without touching a tenant. Preview answers “does the page behave” and cannot answer “does it work for this role on a real tenant.” See [why preview is not tenant proof](https://kiweely.com/guides/workday-extend-app-preview-is-not-tenant-proof).

## How do I test on a Development tenant?

Workday recommends sample data only, never PII, in WCP Development tenants, which use a staged sample enterprise (for example Global Modern Service). Without a company tenant you can use a personal Development tenant from the [Workday Open Developer Program](https://kiweely.com/guides/workday-open-developer-program-getting-started); Workday notes personal tenants expire if you do not sign in for 7 days.

The loop with the CLI:

-   `wdcli app validate <appRefId>` validates App Builder components only. Validate orchestrations in Orchestration Builder.
-   `wdcli app deploy <appRefId> --tenant-alias <alias> --version <v>` deploys to the tenant.
-   `wdcli app builds logs <buildId>` prints a failed build’s log.
-   `wdcli app preview <appRefId>` opens a local preview.

To test as other people, Workday supports proxy access policies on WCP Development tenants (Create Proxy Access Policy, restricted to the WCPDEV environment). See [testing as several roles](https://kiweely.com/guides/workday-multi-persona-proxy-testing).

## Worked example: a test plan for a “Time Off Request” app

The app has a business object, a business process with an approval step, a page for employees and a page for managers. This plan is an example of how to use the stages. The environments and promotion rules are Workday’s; the cases are ours.

| Stage | Case | Expected result | Evidence to keep |
| --- | --- | --- | --- |
| Preview, mock data | Employee page with an empty list, one row, and a 500 response | Empty state, row shown, error message shown | Screenshot per response |
| Development | Submit a request as an employee, reopen the saved object | Saved values match what was typed | Record readback, app version |
| Development | Approve, then send back | Business process moves to the right step; send back opens the revise page | Step history |
| Development | Open the manager page as someone without the approver role | Access denied or page hidden | Role used, result |
| Development | Break a call on purpose | A page error with a common request ID you can find in Logs | The ID and the log lines |
| Implementation | QA runs the same cases with QA’s own users | Same results on a second tenant | Tenant, version, results |
| Sandbox | User acceptance with production-like data | People who will use it sign off | Sign-off, defects list |
| Before Production | Check promotion deadline and queued model changes | Promotion lands in the Friday-night update you expect | Date promoted |

Record Passed, Failed and Not tested separately, and say which environment each result came from. Reopen the saved record rather than trusting a success message, and look in the Logs tab (filter `wd_common_request_id`, then read `pageError`, `pageError.script` and `responseError`) when something differs from the source. A quiet log does not prove the journey worked.

## When do model changes actually reach a tenant?

Model components such as business objects, business processes and tasks deploy to Implementation, Sandbox and Production as part of Workday’s Weekly Service Update. You can only install an app with model components after they deploy. Promotion deadlines depend on region and data center:

| Region | Weekly promotion deadline (Pacific) |
| --- | --- |
| EU, all data centers | Thursday 3:59:59 AM |
| US region, Asia Pacific data centers (WD102, WD105, WD109, WD117) | Thursday 8:59:59 AM |
| US region, all other data centers | Thursday 11:59:59 PM |
| Other Extend regions | Thursday 3:59:59 AM |

Miss the deadline and the model components deploy the Friday night one week later. For a first go-live, Workday says to promote an app with model components to Production one week before Workday creates your Production tenant from your Gold tenant.

## What can I change after I promote, and what can’t I undo?

Updating an app creates a new Development version while Implementation, Sandbox and Production keep running the earlier version until you promote. You do not reinstall after an update.

-   You can add model components, add fields to existing components, add security domains to objects and fields, and update business process page routes.
-   You cannot remove model components that deployed in an earlier version.
-   Workday lists the allowed edits after promotion, for example changing labels and names, removing derived fields, and enabling page security only from disabled to enabled. Anything outside that list should be tested as a one-way change.
-   Once an app is installed on an Implementation, Sandbox or Production tenant you cannot remove it from that tenant. Retiring is irreversible, cannot be done in the CLI, and only Company Admins can do it.
-   In Sandbox and Sandbox Preview you must create refresh tokens in both tenants in the external client credential store. Workday says business objects created in Sandbox Preview without a refresh token there produce HTTP 500 errors.

## Is Workday end-to-end testing the same as testing an Extend app?

They overlap but are not the same job. This guide covers an Extend app: its own pages, business objects, business processes and orchestrations, tested stage by stage. Testing a Workday configuration end to end across a business process or an implementation is a separate exercise, covered in [Workday end-to-end testing](https://kiweely.com/guides/workday-end-to-end-testing). An app that passes in a Development tenant has not shown that it works against your Production configuration, which is why the Implementation and Sandbox stages exist.

Kiweely Vine can validate an Extend app, deploy it to a Development tenant and test it in a browser, and treats work as ready only once it has been used as the people it is for.

## Watch Kiweely Vine build and test an Extend app

![Kiweely Vine testing a Remote Work Arrangement Extend app as the employee: the request page flags a missing start date before it can be submitted](https://kiweely.com/guides/workday-extend-testing/media/vine-extend-app-remote-work-ea72afc873ba.webp)

From the film: testing as the employee, the request flags missing details before it is submitted.

A consultant describes a remote work request app in plain business words. Kiweely Vine builds it, publishes it to a Workday Development tenant and tests it as the employee, the manager and HR: employees ask to work remote or hybrid, managers approve or send back with a comment, and HR sees one list of who works where. About two hours of real work, shown in 13 minutes. Every acceptance check passed in Development.

[Watch the film (13 min)](https://kiweely.com/vine/films/remote-work-arrangement) · [Start for free](https://kiweely.com/sign-in?intent=signup)

## Frequently asked questions

### Which environments does a Workday Extend app pass through before Production?

Development, Implementation, Sandbox and Production. Workday describes them as Build, Test, Verify and Release, and each promotion level matches the runtime of the tenant where the app can be deployed or installed.

### Can I use real employee data in a Development tenant?

Workday recommends sample data only, and never PII, in WCP Development tenants. A Development tenant uses staged data for a sample enterprise such as Global Modern Service.

### What happens if I promote after the weekly deadline?

Apps with model components deploy to tenants in Workday's Weekly Service Update. Promote before the deadline and they deploy that Friday night; promote after it and they deploy the Friday night one week later.

### Can I take an app off a tenant after a bad promotion?

Workday says once an app is installed on an Implementation, Sandbox or Production tenant you cannot remove it from that tenant. After promotion you can only remove it by retiring it, and retirement cannot be reversed.

### Does wdcli app validate cover everything?

No. It validates App Builder components only. Orchestrations are validated separately in Orchestration Builder.

## Sources checked

-   [Concept: Workday Extend App Lifecycle](https://developer.workday.com/documentation/cjw1620248412279)
-   [Deploy Extend Apps to Production](https://developer.workday.com/documentation/yel1612996150414)
-   [Concept: Update Workday Extend Apps](https://developer.workday.com/documentation/inq1613067239283)
-   [Reference: Promotion Deadlines for Extend Apps with Model Components](https://developer.workday.com/documentation/giw1660842903762)
-   [Reference: Allowed Updates After Extend App Promotion](https://developer.workday.com/documentation/haf1635898070118)
-   [Extend App Preview](https://developer.workday.com/documentation/xww1669752564537)
-   [Mock Data](https://developer.workday.com/documentation/fyx1669849518693)
-   [Application Logs](https://developer.workday.com/documentation/hlt1558652308211)
-   [Reference: WDCLI for Extend Apps Commands](https://developer.workday.com/documentation/GUID-16d9d3f3-ba63-4022-8a84-ad78bd5189ca-enHYPHENus/ReferenceWorkdayDeveloperCLIWDCLIforExtendAppsCommands)

## Related guides

[All guides](https://kiweely.com/guides)

-   [### Promoting a Workday Extend app to Implementation, Sandbox and Production: deadlines, undoing it, and the security you need Promote from the Developer Site Promotions tab one level at a time. Model components deploy only in the Friday Weekly Service Update, so promote before the Thursday deadline. A promoted app can’t be deleted, only retired, and its model components can’t be removed.](https://kiweely.com/guides/workday-extend-app-promotion)
-   [### How to get a Workday developer account and a free development tenant Create a free account at developer.workday.com, open Console > Tenants, request a development tenant, then sign in as lmcneil with the emailed password and change it within 72 hours. Sign in at least every 7 days or the tenant is deleted.](https://kiweely.com/guides/workday-open-developer-program-getting-started)
-   [### Multi-Persona Testing in Workday: Verifying the Proxy Chain in Sandbox Step through the multi-persona proxy testing sequence in Workday Sandbox. Verify role handoffs, condition rule evaluation, and field writebacks across each approval tier.](https://kiweely.com/guides/workday-multi-persona-proxy-testing)
-   [### How do I find the real cause of a Workday Extend app validation error? First work out which check rejected the app: the App Builder Validate pane, the build log from Save to App Hub, the deploy, or the running page. Then match the code (E102, P300, B100) to Workday’s own text, fix that one cause and rerun the same check.](https://kiweely.com/guides/workday-extend-validation-errors)

### More guides on Extend apps and pages

[All 97 guides](https://kiweely.com/guides#extend)

-   [Workday UI Automation Testing: Why Scripts Break and How to Automate Reliably](https://kiweely.com/guides/workday-ui-automation-testing)
-   [Why does a PMD endpoint fail when the key is lowercase endpoints?](https://kiweely.com/guides/workday-pmd-endpoint-lowercase-keys)
-   [What does Extend PMD “failed to resolve a definition” mean?](https://kiweely.com/guides/workday-extend-pmd-failed-to-resolve-definition)
-   [Why does an Extend edit page show Internal Server Error on submit?](https://kiweely.com/guides/workday-extend-internal-server-error-on-submit)
-   [How do I fix “Failed to generate WUL from PMD snippet” in Extend?](https://kiweely.com/guides/workday-extend-failed-to-generate-wul-from-pmd)
-   [Why does my Extend custom validation message never display?](https://kiweely.com/guides/workday-extend-custom-validation-error-not-displayed)
-   [How do I migrate a Workday Extend app from WCPISU to simplified ISU?](https://kiweely.com/guides/workday-migrate-wcpisu-to-simplified-isu)
-   [What is known about a December 2026 Extend model components compiler upgrade?](https://kiweely.com/guides/workday-extend-model-compiler-upgrade-2026-12)

### From the blog on Extend apps and pages

[All posts](https://kiweely.com/blog)

-   [Workday Extend vs. Power Apps and ServiceNow App Engine: where to build a Workday app](https://kiweely.com/blog/workday-extend-vs-power-apps-servicenow-app-engine)
-   [What can you change in a Workday Extend app after its model components deploy?](https://kiweely.com/blog/workday-extend-model-components-first-deploy)
-   [How do you test a Workday Extend app end to end?](https://kiweely.com/blog/test-workday-extend-app-end-to-end)

## Let Workday check the work.

Kiweely writes WQL and builds orchestrations in your own tenant, and Workday, not Kiweely, says whether they passed.

[Start for free](https://kiweely.com/download) [See how it works](https://kiweely.com/vine/how-it-works)

## Get the next guide in your inbox.

One email a month with new guides and one Extend tip. Nothing else.
