---
title: "Fix Workday 'This Task Is Not Available' BP Errors — Kiweely"
description: "Diagnose Workday 'This task is not available' and 'Waiting on Initiator' business process steps: Save for Later locks, Send Back security, and reassignment…"
url: https://kiweely.com/guides/workday-business-process-this-task-is-not-available
---

# Why Workday Says ‘This Task Is Not Available’ or ‘Waiting on Initiator’ on a Business Process Step

Workday shows This task is not available when a My Tasks link points to a step that was already submitted, reassigned, locked by Save for Later, or opened under the wrong account. Waiting on Initiator means the Initiation step was saved as a draft or sent back without step action security.

-   **Checked** against Workday on November 13
-   Applies to **Workday Business Processes**
-   6 min read
-   Published November 13
-   By Kiweely

Workday displays **This task is not available** when a user opens a **My Tasks** or email link for a business process step that is no longer actionable under their current session—most often because a peer in the same role already submitted it, locked it with **Save for Later**, reassigned it, or the user is signed into the wrong Candidate vs. Worker account. A status of **Waiting on Initiator** (or **Awaiting Action** on the **Initiation** step) means the starter saved the transaction as an unsubmitted draft, or an approver used **Send Back** to return the event to an initiator who has not resubmitted—or can no longer open—the step.

Instead of asking users to clear browser cache blindly, an administrator can pinpoint the exact state of any stuck step in under sixty seconds from the event’s **Full Process Record**.

## Diagnostic Table: Match the Symptom to the Exact Root Cause

| What the User or Admin Sees | Underlying Workday Mechanism | What to Check on Full Process Record |
| --- | --- | --- |
|  **Email link shows ‘This task is not available’ right away** | Another user in the same role already completed, canceled, or reassigned the step |  **Process** tab -> check **Status** (*Step Completed*, *Canceled*, or *Reassigned* with original assignee in the **For** column) |
|  **Step still shows In Progress, yet peers get ‘This task is not available’** | One recipient clicked **Save for Later**, which removes the **My Tasks** item from every other recipient |  **Process** tab / **All Actions** tab -> identify which user holds the saved draft and have them **Submit** or **Cancel** |
|  **Delegator clicks notification link and gets blocked** | Task was delegated via **Manage Delegation Settings** with **Retain Access to Delegated Tasks within My Tasks** unchecked |  **Process** tab -> **Person** column lists only the delegate; **All Actions** shows the delegate as **Awaiting** |
|  **New hire / internal transfer gets blocked on Onboarding link** | Signed into external Candidate Home session while clicking an internal Worker task link (or pre-hire step gated by effective date) | Confirm which portal URL and account type the person used, and compare event effective date vs. step conditions |
|  **Event sits at ‘Waiting on Initiator’ indefinitely** | Starter clicked **Save for Later** on the **Initiation** step, or an approver clicked **Send Back** to **Initiation** |  **Process** tab -> check whether row 1 (*Initiation*) is still open or whether **Comments** shows a **Send Back** reason |
|  **Initiator sees the sent-back event in history, cannot open task** | Initiator lost the constrained role they held at initiation, or the **Business Process Security Policy** omits **Initiator** on that step | Compare initiator’s current role assignments against **Edit Business Process Security Policy** step permissions |

## Step 1: Inspect the `Full Process Record` First

With Modify access on the *Business Process Administration* domain (or **View All** on the specific Business Process Security Policy), locate the business process instance—either from the target worker’s **Worker History**, or by running **Business Process Transactions Awaiting Action** / **Business Process Transactions of Type Awaiting Action**.

Open the event’s related actions menu and select **Business Process > Full Process Record**, then check three tabs:

1.  **Process tab:** Check the **Status** column on the active row, the **Person (Up to 5)** column, and the **All Persons** count. A completed step displays `1` in **All Persons**; an unassigned step displays `0` (meaning the target role is vacant and needs [reassigning an awaiting action](https://kiweely.com/guides/workday-reassign-awaiting-action)); an active shared role displays the total count of eligible assignees. Check the **For** column to see if an admin or peer already reassigned the task away from the person clicking the link.
2.  **Comments tab:** Look for a **Send Back** entry. When a reviewer clicks **Send Back** to return an event to a prior *Action* step or the *Initiation* step, Workday logs the comment and timestamps the return.
3.  **All Actions tab:** Review the **By** column and **Event Record Moment** to see the exact chronological chain of initiation, **Save for Later**, delegation, or reassignment events.

## Step 2: Resolve ‘This Task Is Not Available’ Without Breaking the Event

Once the **Full Process Record** reveals why the link failed, apply the matching fix:

-   **Colleague completed or claimed the step via `Save for Later`:** Have the user navigate directly to **My Tasks** inside Workday rather than clicking old email URLs, and check **Archive** in **My Tasks** if they already submitted it. If a teammate clicked **Save for Later** and went on leave (which strips the task from all other role members and disables **Skip This Task**), an administrator can use **Reassign Steps** or **Cancel** depending on whether entered draft values are needed.
-   **Delegation hid the task from the delegator:** Under **Manage Delegation Settings**, leaving **Retain Access to Delegated Tasks within My Tasks** unchecked removes the delegator from the **Process** tab’s **Person** list and routes the item exclusively to the delegate. Either have the delegate complete the step or update the delegation rule.
-   **Candidate vs. Worker session collision:** During recruiting-to-hire transitions, candidates frequently have an active Candidate Home browser tab open when their new employee SSO credentials arrive. Have them sign out completely, open a clean browser session on the internal tenant sign-in page, and open **My Tasks** directly from the top navigation bar instead of an email deep link.
-   **Broken `Generate Documents` Run-As security:** If a business process hangs on a *Generate Documents* step and the intended recipient has nothing in **My Tasks**, check the step’s **Run As User** configuration. An Integration System User configured as **Run As User** must belong to an unconstrained ISSG secured to the *Document Generation Results* domain **and** hold **View All** permission on the parent Business Process Security Policy; otherwise Workday fails to generate the document and leaves the step stranded.

## Step 3: Clear Steps Stuck on ‘Waiting on Initiator’

When a transaction stalls on the initiator, distinguish an abandoned draft from a **Send Back** permission trap:

Fails

```
# Classic Send Back security trap:
1. HR Coordinator initiates "Change Job" for Worker A in Supervisory Org East
2. Next week, HR Coordinator transfers to Supervisory Org West (losing constrained East role)
3. Approver clicks "Send Back" -> returns event to Initiation / Action step
4. Event sits "Waiting on Initiator", and HR Coordinator gets "This task is not available"
```

Works

```
# Clean resolution:
1. Admin checks Full Process Record -> Process tab confirms step is awaiting former coordinator
2. For one-off event: Admin runs Business Process > Reassign Steps to current East HR Coordinator (or Cancels draft)
3. For systemic BP step security gaps: Edit Business Process Security Policy -> grant Initiator / target group step access -> Activate Pending Security Policy Changes
```

Unsubmitted Initiation steps cannot always be reassigned

Workday allows administrators to reassign active workflow steps after initiation via **Reassign** / **Reassign Steps**, whereas an **Initiation** step that was merely saved via **Save for Later** and never submitted has not yet kicked off downstream workflow routing. If the original drafter left the company or abandoned an unsubmitted **Initiation** draft, cancel the draft event (see [when to rescind, cancel, or correct a business process](https://kiweely.com/guides/workday-business-process-rescind-cancel-correct)) and initiate a clean transaction.

If the step stalling the workflow is a custom *Action*, *Review Documents*, or *Questionnaire* step configured to route to the **Initiator** security group—and every initiator hits **This task is not available**—open **Edit Business Process Security Policy** for that business process type (see [domain vs. business process security policies](https://kiweely.com/guides/workday-domain-vs-business-process-security-policies)). Verify that **Initiator** (or the appropriate role-based security group) is explicitly listed in the **Action** / step permission grid, ensure no routing restriction on the step excludes them, and run **Activate Pending Security Policy Changes**.

## How to Verify the Fix Worked

To prove the step is genuinely unblocked—not just visible in an admin report—check two things:

1.  On **Full Process Record > Process**, confirm **Status** is *Awaiting Action*, **All Persons** is at least `1`, and the expected worker appears in **Person (Up to 5)**.
2.  In Sandbox or Implementation, proxy as that assignee (or have the user open **My Tasks** directly in Production without using the old email link) and verify the task form opens with active **Submit** / **Approve** buttons. For broader stuck-queue cleanup, pair this check with our [business process awaiting action troubleshooting guide](https://kiweely.com/guides/business-process-awaiting-action).

When you connect a tenant in [Kiweely Vine](https://kiweely.com/vine), you can paste a stuck event name or worker ID and let the agent inspect the **Full Process Record**, step conditions, assignee role history, and **Business Process Security Policy** together—explaining immediately whether the step is locked by **Save for Later**, missing `Initiator` step permissions, or waiting on a vacant role, and testing workflow fixes in a visible, stoppable browser across personas.

## Frequently asked questions

### Why do I get 'This task is not available' when clicking a Workday email notification link?

Email links point to a specific step assignment ID. If another member of the shared role already completed the step, clicked Save for Later, or reassigned the step, or if you are signed into a Candidate account instead of your internal Worker account, Workday blocks the stale link with This task is not available.

### What happens to other recipients in My Tasks when someone clicks Save for Later?

When one recipient clicks Save for Later on a business process step, Workday immediately removes that My Tasks item from all other recipients assigned to the role so two people cannot edit the step simultaneously.

### What does Waiting on Initiator mean on a Workday business process?

Either the person who started the event clicked Save for Later on the Initiation step without clicking Submit, or a downstream approver used Send Back to return the event to the Initiation step for correction.

### Why cannot the original initiator open a step that was sent back to them?

If the initiator changed supervisory organizations or lost their constrained role assignment after starting the event, or if the Business Process Security Policy lacks permission for the Initiator or their current security group on that step, Workday routes the step back but blocks them from acting on it.

## Sources checked

-   [Concept: View Business Process Details](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/business-process-framework-concepts/dan1370797847910.html)
-   [Reference: Actions Available on Business Processes](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/business-process-framework-concepts/mee1553714361673.html)
-   [Edit Business Process Security Policies](https://doc.workday.com/admin-guide/en-us/authentication-and-security/configurable-security/security-policies/dan1370796362110.html)
-   [Reassign Tasks](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/manage-business-processes/dan1370797864165.html)
-   [My Tasks](https://doc.workday.com/admin-guide/en-us/manage-workday/user-experience/my-tasks/wnk1659480339593.html)

## Related guides

[All guides](https://kiweely.com/guides)

-   [### What does rescinded mean in Workday? Rescind vs cancel vs correct, and when each applies Rescinded means Workday reversed a business process that had already passed its Completion step and restored the data to how it was before. Cancel stops one still in progress; Correct fixes the event’s details in place.](https://kiweely.com/guides/workday-business-process-rescind-cancel-correct)
-   [### Workday Domain Security vs. Business Process Security Policies: Which Controls What A domain security policy controls View/Modify (and Get/Put) access to reports, report fields, setup tasks and web services. A business process security policy controls who can start, approve, cancel, rescind or view a transaction. Both need activation.](https://kiweely.com/guides/workday-domain-vs-business-process-security-policies)
-   [### Workday Awaiting Action: who is the step waiting on, and how do you move it? Awaiting Action means a step is waiting for someone to act, and a day or more is normal. Open Business Process > Full Process Record to see who, then have them finish it in My Tasks, or reassign, delegate or manually advance the step.](https://kiweely.com/guides/business-process-awaiting-action)

### More guides on Business processes and security

[All 27 guides](https://kiweely.com/guides#business-processes)

-   [Why Can’t a Security Group See a Workday Dashboard or Worklet After You Added Permission?](https://kiweely.com/guides/workday-worklet-dashboard-not-visible-security)
-   [Workday custom validations and condition rules: block bad data with Critical or Warning severity](https://kiweely.com/guides/workday-custom-validations-condition-rules)
-   [Workday Role-Based, User-Based, Intersection, and Aggregation Security Groups](https://kiweely.com/guides/workday-role-based-user-based-intersection-security-groups)
-   [Workday Business Process Advanced Routing: Exclude Initiator, Prior Approvers, and Alternates](https://kiweely.com/guides/workday-business-process-routing-mutual-exclusion)
-   [Constrained vs unconstrained security groups in Workday: which workers can a member see?](https://kiweely.com/guides/workday-constrained-vs-unconstrained-security-groups)
-   [My Workday business process condition rule is not working and the step did not fire: how to troubleshoot it](https://kiweely.com/guides/condition-rule-not-working)
-   [Configuration Change Tracker Restricted vs Global auditor and packager](https://kiweely.com/guides/workday-cct-restricted-vs-global-packager-security)
-   [Current vs Proposed fields in Workday condition rules](https://kiweely.com/guides/workday-condition-rules-current-vs-proposed)

### From the blog on Business processes and security

[All posts](https://kiweely.com/blog)

-   [The CISO Checklist for Connecting Claude, ChatGPT, or Gemini to Workday](https://kiweely.com/blog/ciso-security-review-checklist-connecting-llms-to-workday)
-   [Using Face ID and Fingerprint Unlock with Workday Single Sign-On for Deskless Workers](https://kiweely.com/blog/biometric-face-id-fingerprint-reauth-for-workday-mobile-apps)
-   [Pass-Through Workday Screens vs. Caching HR Portals: Security and Sync Tradeoffs](https://kiweely.com/blog/pass-through-workday-ui-vs-caching-hr-portals)

## Let Workday check the work.

Kiweely writes WQL and builds orchestrations in your own tenant, and Workday, not Kiweely, says whether they passed.

[Start for free](https://kiweely.com/download) [See how it works](https://kiweely.com/vine/how-it-works)

## Get the next guide in your inbox.

One email a month with new guides and one Extend tip. Nothing else.
