---
title: "Fix Workday ACA 1095-C Code 2C & Affordability Thresholds"
description: "Fix Workday Form 1095-C Line 16 Code 2C mismatches on mid-month terminations, COBRA, and part-time workers, and update 2026 (9.96%) and 2027 (10.22%) limits."
url: https://kiweely.com/guides/workday-aca-1095c-errors-affordability-setup
---

# How to Fix Workday ACA 1095-C Code 2C Mismatches and Update Annual Affordability Thresholds

Workday derives Form 1095-C Line 16 Code 2C only when an active employee stays enrolled in minimum essential medical coverage for every calendar day of the month. Mid-month terminations default to 1H and 2B unless you enable coverage-end-date logic on the 1094-C Company Configuration.

-   **Checked** against Workday on November 13
-   Applies to **Workday Benefits**
-   8 min read
-   Published November 13
-   By Kiweely

Workday assigns Form 1095-C Line 16 Code `2C` only when you employ a worker and enroll them in Minimum Essential Coverage (MEC) for every calendar day of the month. When `2C` is missing for an enrolled employee or appears alongside the wrong Line 14 offer code, the root cause is almost always mid-month termination settings on **Create ACA 1094-C Company Configuration**, incomplete ACA flags on **Edit Benefit Plan**, or stale affordability parameters on **Affordable Care Reporting Configuration**.

## Why Does Workday Drop or Misapply Code 2C on Form 1095-C Line 16?

Under IRS Section 4980H instructions, Code `2C` (employee enrolled in coverage offered) outranks waiting-period code `2D` and all three affordability safe harbors (`2F`, `2G`, and `2H`). Only Code `2E` (multiemployer interim rule relief) takes precedence over `2C`. Because `2C` shields an Applicable Large Employer (ALE) from a Section 4980H(b) penalty for that calendar month, any configuration gap that suppresses `2C` creates false penalty exposure or IRS AIR transmission rejections.

Compare the observed Line 14 and Line 16 output in **ACA 1095-C Form/Box Tester** against the five tenant rules that control `2C` derivation:

| Observed 1095-C Output | Root Cause in Workday | Exact Configuration Check |
| --- | --- | --- |
| Termination month shows `1H` / `2B` even though medical coverage ran until the 30th or 31st | Worker terminated before the last day of the month and company config uses termination date instead of coverage end date | Open **Create ACA 1094-C Company Configuration** (or edit the existing year’s record) and select **Use coverage end date in month of termination**. |
| Active enrolled employee has `1H` and blank Line 16 all year | Benefit plan or coverage type is missing medical or MEC checkboxes | Check **Manage Benefit Coverage Types** (**Medical** checked) and **Edit Benefit Plan** under **US Affordable Care Act Options**. |
| Part-time worker in a self-insured plan shows `1G` on Line 14 and blank Line 16 | Expected IRS behavior: worker was never ACA full-time in any month of the year | Verify **Benefits > View ACA Measurement History**; `2C` cannot be paired with full-year `1G`. |
| Former employee on COBRA shows `1H` / `2A` in months after termination | Expected IRS behavior for terminated employees on COBRA continuation | Leave as `1H` / `2A` for post-termination COBRA months; `2C` applies only while employed. |
| Line 16 shows `2C`, but Line 14 shows `1B` or `1C` instead of `1E` or `1K` | Spouse relationship type is not mapped to Workday’s standard *Spouse* category | Open **Maintain Related Person Relationships** and set **Map Relationship to Workday** to *Spouse*. |

Checking **Use coverage end date in month of termination** changes only the month in which the termination occurred. For a full-time worker who terminates on May 12 with medical coverage active through May 31, Workday replaces `1H` / `2B` in May with the applicable offer code (`1A` or `1E`), populates Line 15 when required, and sets Line 16 to `2C`. June through December remain `1H` / `2A`, even if the former worker elects COBRA.

If an entire medical plan fails to produce `2C`, inspect **Edit Benefit Plan** (secured to the *Set Up: Benefits* domain in the Benefits functional area). Workday treats a plan as ACA-qualifying medical coverage only when all four attributes are set:

1.  Coverage type has **Medical** selected on **Manage Benefit Coverage Types**.
2.  **Funding Method** on the plan is set to *Fully-Funded* or *Self-Insured*.
3.  **ACA Minimum Essential Coverage** is enabled for Employee (and Spouse/Dependents where offered).
4.  **ACA Minimum Value Coverage** is selected if the plan meets the 60% actuarial value threshold required for codes `1A` through `1E`, `1J`, and `1K` (plans without minimum value produce `1F`).

## How Do You Update Annual IRS Affordability Percentages (9.96% for 2026 and 10.22% for 2027)?

The IRS indexes the Section 36B / 4980H affordability threshold every plan year. After dropping to 9.02% for 2025 plan years, the threshold rose to **9.96% for plan years beginning in 2026** (IRS Rev. Proc. 2025-25) and **10.22% for plan years beginning in 2027** (IRS Rev. Proc. 2026-26), crossing 10% for the first time since ACA reporting began. Leaving prior-year percentages in your tenant causes Workday to misclassify Qualifying Offers (`1A` vs. `1E`) and understates your monthly safe harbor room.

Update affordability and safe harbor logic across two separate Workday tasks before running year-end tests:

### 1\. Update the Poverty Line and Adjusted Percentage for Code 1A

Open **Affordable Care Reporting Configuration** (secured to *Affordable Care Act (ACA) Administration* in the Benefits functional area) and update both the mainland single Federal Poverty Line (FPL) dollar figure and the IRS adjusted percentage for the reporting tax year:

text

```
Tax Year 2026 Calendar-Year Plan Benchmark (FPL Safe Harbor):
- Prior-year (2025) Mainland Single FPL used at rate-setting: $15,650
- 2026 IRS Adjusted Affordability Percentage: 9.96%
- Max Monthly Employee-Only Contribution for 1A / 2G: ($15,650 * 0.0996) / 12 = $129.89/month
  (Or $132.46/month for non-calendar 2026 plans eligible to use the $15,960 2026 FPL)

Tax Year 2027 Plan Year Percentage:
- 2027 IRS Adjusted Affordability Percentage: 10.22% (Rev. Proc. 2026-26)
```

When the lowest-cost, self-only minimum value plan offered to a full-time employee costs at or below that monthly FPL threshold and minimum essential coverage is also offered to spouses and dependents, Workday derives Code `1A` on Line 14 and leaves Line 15 blank. If the employee-only monthly cost exceeds the FPL threshold, Workday outputs `1E` (or `1K` for conditional spousal coverage) and populates the exact lowest monthly employee share on Line 15.

Never Leave Line 15 Blank on Codes 1B–1E or 1J–1K

If your lowest-cost employee-only plan is $0.00 per month and does not use Code `1A` (for example, dependents are not offered coverage so Line 14 is `1B`), Line 15 must display `0.00`. Leaving Line 15 blank alongside `1B`, `1C`, `1D`, `1E`, `1J`, or `1K` triggers IRS rejection code `AIRBR1011` during transmission.

### 2\. Map Section 4980H Safe Harbors for Waived Employees (`2F`, `2G`, `2H`)

Employees who enroll get `2C` on Line 16. Full-time employees who *waive* medical coverage leave Line 16 completely blank unless you explicitly link them to a Section 4980H(b) safe harbor:

1.  Run **Create Benefit Eligibility Rule** to define each population (for example, salaried exempt workers vs. hourly retail workers, checking your [condition rule logic](https://kiweely.com/guides/condition-rule-not-working) carefully so terminated or part-time populations are not excluded inadvertently).
2.  Run **Create ACA 4980H Safe Harbor Configuration** for the reporting calendar year.
3.  Map your eligibility rules to `2F` (Form W-2 safe harbor), `2G` (Federal Poverty Line safe harbor), or `2H` (Rate of Pay safe harbor), and select the applicable months.

Keep the IRS consistency rule in mind when assigning `2F`: if you claim the Form W-2 affordability safe harbor for an employee, you must apply `2F` for all calendar months of the year in which that employee was offered health coverage, rather than mixing `2F` and `2H` across months for the same person.

## How Do Look-Back Measurement Periods Affect Code 2B and Code 2D?

When variable-hour or seasonal workers unexpectedly show `2B` (not full-time) instead of `2D` (in an initial measurement or waiting period, known as a Limited Non-Assessment Period) or fail to generate a 1095-C at all, audit the hours feed into your ACA look-back engine.

Workday evaluates full-time status (typically 30 hours per week or 130 hours per month) in two ways:

-   **Scheduled Weekly Hours** on the position as of the first and last day of each month for standard full-time staff.
-   **Completed ACA Measurement Periods** configured via **Create ACA Measurement Period**, which pair an Initial or Ongoing Measurement Period with an Administrative Period (up to 90 days) and a Stability Period.

For tenants running Workday Payroll, open **Affordable Care Reporting Configuration** and verify that both **Payroll Calculation for Paid Hours Worked** and **Payroll Calculation for Paid Hours Not Worked (PTO)** include every qualifying earning calculation—including paid vacation, sick time, jury duty, military leave, and unpaid FMLA or USERRA hours that must be credited under ACA rules. You can audit the underlying payroll hours with a [custom Payroll Result Lines summary report](https://kiweely.com/guides/workday-payroll-aggregate-earnings-deductions-report) alongside the delivered **View Affordable Care Act Workers Hours and Wages** report. If you run an external payroll system via Payroll Interface, confirm every pay period was loaded through the *Affordable Care Act Workers Hours And Wages* EIB (or the *Put Affordable Care Act Worker Hours And Wages* web service) before evaluating measurement periods.

For rehired employees, check **Rehire Gap** (13 weeks for general employers, 26 weeks strictly for qualified educational institutions) and **Use Rule of Parity** on **Affordable Care Reporting Configuration**. A worker rehired within 13 weeks resumes prior ACA full-time stability status rather than restarting a `2D` initial measurement period.

## How Do You Test, Override, and Regenerate 1095-C Data Before Filing?

Fixing benefit plan checkboxes or company configuration does not update existing 1095-C form records automatically. Follow this exact verification sequence so your test audit matches what the IRS receives:

text

```
Step 1: Calculate 1094-C Total and Full Time Employee Counts By Month
        -> Populates Part III monthly counts on Form 1094-C (prevents IRS error AIRBR835).
Step 2: Run ACA 1095-C Form/Box Tester and ACA 1094-C Form/Box Tester
        -> Evaluates LIVE tenant configuration before committing form snapshots.
Step 3: Run Create ACA 1095-C/1094-C Data
        -> Leave "Update 1094-C Data Only" UNCHECKED so Line 14/15/16 codes regenerate.
Step 4: Run View ACA 1095-C Form Data & View 1095-C Form Recipient Data
        -> Confirm stored recipient rows match the Tester output.
```

Watch the “Update 1094-C Data Only” Trap

On **Create ACA 1095-C/1094-C Data**, selecting **Update 1094-C Data Only** tells Workday to refresh only employer Part I contact details while skipping every employee’s Line 14, Line 15, and Line 16 calculation. Always leave that box clear when regenerating worker codes.

When you have edge cases Workday does not calculate—such as ICHRA offers (`1L` through `1S`) with Line 17 ZIP codes, COBRA enrollees not tracked in a Workday Retiree Organization, or specific monthly code overrides—export **View 1095-C Form Recipient Data** and upload adjustments via the **Import 1095-C Form Recipients Data** EIB. Because the exported report masks Social Security Numbers and ITINs, fix any missing or mistyped worker or dependent SSNs directly on the person’s Workday record *before* exporting rather than pasting masked SSNs into the [EIB template](https://kiweely.com/guides/workday-eib-load-errors), which causes IRS `Shared-008` and `AIRBR625` rejections.

If you want to trace why a specific cohort of terminated or variable-hour workers landed on `1H`/`2B` instead of `2C` without clicking through dozens of benefit plans, measurement periods, and eligibility rules by hand, [Kiweely Vine](https://kiweely.com/vine) reads your live non-production Workday configuration, cross-checks your 1094-C company settings against **ACA 1095-C Form/Box Tester** output, and drafts the exact configuration or EIB adjustments for your approval before anything changes.

## Frequently asked questions

### Why does Workday put 1H and 2B instead of 2C in an employee's termination month when medical coverage runs through month-end?

By default, Workday evaluates employment status through the last calendar day of the month and assigns 1H and 2B when a worker terminates mid-month. Select the Use coverage end date in month of termination check box on the Create ACA 1094-C Company Configuration task so Workday reports the offer code on Line 14, the employee cost on Line 15, and 2C on Line 16 for that final month.

### What are the IRS ACA affordability percentages for 2026 and 2027 plan years?

The IRS adjusted affordability threshold is 9.96% of household income or safe harbor wages for plan years beginning in 2026 (Rev. Proc. 2025-25) and 10.22% for plan years beginning in 2027 (Rev. Proc. 2026-26). Update the adjusted percentage and federal poverty line values on the Affordable Care Reporting Configuration task before generating ACA data.

### Why didn't my changes appear on employee 1095-C forms after fixing the benefit plan or safe harbor setup?

The ACA 1095-C Form/Box Tester report reads live tenant configuration, but View ACA 1095-C Form Data and published PDFs read stored snapshot records. You must rerun Create ACA 1095-C/1094-C Data with the Update 1094-C Data Only check box cleared to overwrite Line 14, Line 15, and Line 16 values.

### Does Workday derive ICHRA codes 1L through 1S and Line 17 ZIP codes automatically?

No. Workday does not calculate Individual Coverage HRA (ICHRA) Line 14 codes (1L through 1S), Employee Age on January 1, or Line 17 ZIP codes. You must populate those fields using the Import 1095-C Form Recipients Data EIB.

## Sources checked

-   [Reference: Affordable Care Act 1095-C Form Codes](https://doc.workday.com/admin-guide/en-us/human-capital-management/benefits/patient-protection-and-affordable-care-act/reference--aca-1095-c-form-codes.html)
-   [Steps: Set Up ACA Forms 1094-C and 1095-C](https://doc.workday.com/admin-guide/en-us/human-capital-management/benefits/patient-protection-and-affordable-care-act/kur1438038157688.html)
-   [Create an ACA Company Configuration](https://doc.workday.com/admin-guide/en-us/human-capital-management/benefits/patient-protection-and-affordable-care-act/geg1494227108009.html)
-   [Configure Affordable Care Act Reporting](https://doc.workday.com/admin-guide/en-us/human-capital-management/benefits/patient-protection-and-affordable-care-act/san1390444837392.html)
-   [Troubleshooting: 1095-C IRS Transmission Errors](https://doc.workday.com/admin-guide/en-us/human-capital-management/benefits/patient-protection-and-affordable-care-act/itn1585153559123.html)

## Related guides

[All guides](https://kiweely.com/guides)

-   [### How to Build a Workday Payroll Summary Report by Worker and Earning Code Over Any Date Range Build custom date-range payroll summary reports as a Matrix Report on the indexed Payroll Result Lines data source rather than Worker or Payroll Results. Group rows by Worker and Pay Component, sum Result Line Amount, and filter via an indexed payment-date data source filter.](https://kiweely.com/guides/workday-payroll-aggregate-earnings-deductions-report)
-   [### How to Build an Extract Single Instance (ESI) Calculated Field in Workday (With Examples) Extract Single Instance pulls one related object from a one-to-many multi-instance field by filtering, sorting, then returning the first, last, or nth match. Use it to create a one-to-one hop before Lookup Related Value when you need a scalar from that related object.](https://kiweely.com/guides/workday-extract-single-instance-calculated-field)
-   [### Why did my Workday EIB load fail? Fix Invalid ID Value and field restriction errors Open the integration event on View Background Process. For Completed With Errors, select Number of Errors to read each row’s message. Invalid ID Value is a wrong Reference ID; ‘does not meet the restrictions’ names the field, and in Workday’s example the launching user lacked security for it.](https://kiweely.com/guides/workday-eib-load-errors)
-   [### My Workday business process condition rule is not working and the step did not fire: how to troubleshoot it Work through nine checks in order: the condition’s type and polarity, which definition ran, its effective date, the Rule Tester, the field values at that moment, rule logic, how the event started, step security, and parallel step order.](https://kiweely.com/guides/condition-rule-not-working)

### More guides on More Workday guides

[All 46 guides](https://kiweely.com/guides#more)

-   [How to Reopen Workday Open Enrollment for One Employee After the Window Closes](https://kiweely.com/guides/workday-reopen-open-enrollment-single-worker)
-   [Why is a worker’s Workday Open Enrollment On Hold or missing after a backdated change?](https://kiweely.com/guides/workday-open-enrollment-stuck-disappeared-elections)
-   [How to Configure or Opt Out of the Modernized Workday Worker Profile and Private Tab](https://kiweely.com/guides/workday-worker-profile-header-private-public-tabs)
-   [How Future-Dated Dependents and ‘View Dependent As Of’ Work in Workday Benefits](https://kiweely.com/guides/workday-dependent-effective-dating-future-dependents)
-   [How Workday Data Cloud Zero-Copy Sharing Works with Snowflake, Databricks, and BigQuery](https://kiweely.com/guides/workday-data-cloud-zero-copy-snowflake-databricks)
-   [Workday Platform Consumption Console: what each page shows, when usage updates and what the alerts do](https://kiweely.com/guides/workday-platform-consumption-console)
-   [Workday Tickets for a Small HRIS Team: Workday Help, Jira or ServiceNow, and How to Triage the Queue](https://kiweely.com/guides/workday-hris-ticketing-help-jira-servicenow)
-   [What Workday AMS Costs in 2026: Hourly Rates, Retainers and What They Cover](https://kiweely.com/guides/workday-ams-cost)

### From the blog on More Workday guides

[All posts](https://kiweely.com/blog)

-   [Turning Failed AI UI Runs into Workday Tickets Clients Accept](https://kiweely.com/blog/failed-ai-ui-runs-into-workday-tickets-clients-accept)
-   [How FDEs Prove ROI on Workday AI Without Vanity Demo Apps](https://kiweely.com/blog/fde-prove-roi-workday-ai-without-vanity-apps)
-   [Forward-Deployed Engineers vs Nest: In-House AI HRIS Team Economics](https://kiweely.com/blog/forward-deployed-engineers-vs-kiweely-nest-economics)

## Let Workday check the work.

Kiweely writes WQL and builds orchestrations in your own tenant, and Workday, not Kiweely, says whether they passed.

[Start for free](https://kiweely.com/download) [See how it works](https://kiweely.com/vine/how-it-works)

## Get the next guide in your inbox.

One email a month with new guides and one Extend tip. Nothing else.
