---
title: "Workday Awaiting Action: Who It Waits On, How to Move It"
description: "Awaiting Action is normal for a day or more. If it sits longer, open the Full Process Record to see who it waits on, then reassign, delegate or advance it."
url: https://kiweely.com/guides/business-process-awaiting-action
---

# Workday Awaiting Action: who is the step waiting on, and how do you move it?

Awaiting Action means a step is waiting for someone to act, and a day or more is normal. Open Business Process > Full Process Record to see who, then have them finish it in My Tasks, or reassign, delegate or manually advance the step.

-   **Checked** against Workday on November 18
-   Applies to **Workday business processes**
-   15 min read
-   Published September 25
-   By Kiweely

An action item that shows **Awaiting Action** is a business process step that still needs a person to act on it. To see who, open the event, select **Business Process > Full Process Record** from its related actions, and read the **Process** tab. The assignee then completes the item from **My Tasks**; if nobody is assigned, or the assignee cannot open it, the cause is an unfilled role, a security change or a routing rule, covered below.

## What does Awaiting Action mean in Workday?

It describes a step that has been entered and is waiting for someone to do something. It is not an error. Workday’s own FAQ says that every step normally waits a day or more for the responsible person to complete it, so a long list of items in Awaiting Action does not by itself point to a problem. What matters is who each one is waiting on and for how long.

## What statuses and task actions will you see?

These are the names Workday’s documentation uses. Step statuses appear on the Process and All Actions tabs of the Full Process Record. Task actions appear on items in My Tasks.

| Shown as | What it means |
| --- | --- |
|  *Awaiting Action* | The step is waiting for the assigned person or people to act. Redirect steps also start in this status. |
|  *Saved for Later* | Someone started the step and saved it without submitting. Workday removes the item from other recipients’ My Tasks. |
|  *Sent Back* | The step was sent back to an earlier step. Workday’s mass reassignment page lists it with *Awaiting Action*, *Saved for Later*, *Manual Send Back* and *Automatic Initiate* as statuses of steps that can be reassigned. |
|  *Reassigned* | Someone acted for the assignee, or an administrator reassigned the step. The For column shows the original person. |
|  *Approved* / *Denied* on the Actions tab | The outcome of a reassignment request, not of the business process. After a denial the step stays with the original owner. |
| Task action **On Hold** | The business process cannot be processed because another event must be completed first. The only action is to open that other event. |
| Task action **Fix** | The business process definition is not valid. Repair or replace it, then select **Restart Business Processes in Error**. |
| Task action **Reassign** | No worker can perform the step because the required role is unfilled. |

The event itself shows an overall status such as *In Progress* until it completes, and *Successfully Completed* when it does.

## How do you find who the process is waiting on?

1.  Open the business process event and select **Business Process > Full Process Record**.
2.  On the **Process** tab, find the step in Awaiting Action. The **Person (Up to 5)** column lists up to five awaiting people, alphabetically, with their roles.
3.  Read **All Persons**. A completed step shows 1. An **unassigned** step shows 0. Any other number is a count you can select to see every awaiting person and role.
4.  For who completed or should complete each action, open the **All Actions** tab. The **By** column shows who completed the step, or who is supposed to act on it, for example “awaiting action from HR Partner”.

To work from the other direction, run one of the reports Workday provides for instances awaiting action:

| Report | Use it to |
| --- | --- |
| Business Process Transactions Awaiting Action | See every instance awaiting action. |
| Business Process Transactions Awaiting Action for X Days | Filter by how long they have waited. Workday says it places the oldest instances at the top. |
| Business Process Transactions of Type Awaiting Action | Limit the output to the business process types you name. |
| Business Process Transactions Awaiting Me | See the steps awaiting your own action, including steps excluded from My Tasks. |

If the task was delegated, the Process tab shows the delegate in the Person column, and with **Retain Access to Delegated Tasks within My Tasks** selected the delegator is not shown there.

## Worked example: a Change Job awaiting action for nine days

This is an illustrative case, not a recorded run. An HR partner runs **Business Process Transactions Awaiting Action for X Days** and sees a *Change Job* for Logan McNeil at the top of the list. She opens the event and selects **Business Process > Full Process Record**.

On the **Process** tab the *Approval* step is in Awaiting Action. Three outcomes are possible, and each has its own fix.

-   **All Persons shows 1 and Person shows an HR partner.** The step is assigned. The person has not acted. Ask them, and ask whether the item is in My Tasks. If the step is excluded from My Tasks, they open **Business Process Transactions Awaiting Me**. Nothing needs to be changed in the configuration.
-   **All Persons shows 0.** The step is unassigned. Workday says a task becomes unassigned when the security group has no user or only users with disabled accounts, and gives the example of a user with a future hire date. Run the **Unassigned Tasks** report, find the group, and either fill the role for the organization or add a member who has an active account. Workday adds that you must confirm the change in Unassigned Tasks to restart the instance.
-   **The Person column shows a name, but they report that they cannot open it.** Check their security. The FAQ points out that the policy may have changed after the task reached their My Tasks, and that a role assignment may start on a future date. Reassign the step to someone with the right access.

## What are the usual causes, and what fixes each?

**Empty role.** The security group named on the step has nobody in it for this organization. Fix the role assignment, not the single event.

**Access changed.** Compare the group on the step with the business process security policy, and check recent security changes. Before reassigning, verify the new person’s access.

**Routing restriction or condition.** Open **Business Process > View Definition** on the event to see the definition it used. An entry condition decides whether a step runs, a routing restriction narrows who can act, and a validation condition set to **Critical** blocks an *Initiation* or *Action* step from exiting while **Warning** lets the person continue (Workday’s Step Conditions page). Test the rules with the [condition rules guide](https://kiweely.com/guides/condition-rule-not-working). For the values behind a rule, use **Reporting > Report Fields and Values** from the step’s related actions.

**To Do not marked complete.** The item completes when the assignee completes it in Workday, not when the work happens elsewhere.

**On Hold or Fix.** Open the blocking event, or have an administrator repair the definition and restart processes in error. Workday’s FAQ notes that an event uses the definition in force when the step was entered, so fixing a definition later does not rewrite an event already running. Check with **View Definition**.

## How do you delegate, reassign or advance a step?

Once you know who the step waits on, the assignee completes it from My Tasks. If that person cannot or will not, a business process administrator uses **Reassign Tasks** to move the step to someone else, or **Advance Manually** to push the event past it. Which of these you can do depends on the business process security policy, not on how senior you are.

| Action | Use it when | What it does |
| --- | --- | --- |
| Delegate | The assignee is away for a period | Temporarily reassigns My Tasks items. The original person keeps responsibility. Set up with **Manage Delegations** in My Tasks, or by an administrator with **Manage Delegation Settings**. |
| Reassign | The owner should change | Permanently moves responsibility. A worker uses **Task Actions > Reassign** on the item and the request needs approval. An administrator uses **Reassign Tasks**, which does not need further approval. |
| Reassign Non-Delegated Tasks | Delegation did not happen because routing restrictions excluded both the delegate and the alternate | Reassigns those tasks. |
| Advance manually | The process must move past the step | Moves on without the assignee’s action. It does not complete the step as the assignee would. |

After any change, reopen the Full Process Record, confirm the new person in the Person column, and check again once they have acted.

## Can you complete someone else’s Awaiting Action task?

Not by default. A step belongs to its assignee, and Workday evaluates security for whoever is signed in. Three legitimate routes exist.

-   **Delegation.** The assignee, or a business process administrator on their behalf, delegates their My Tasks items to another user. The delegate uses **Switch Account** to act on behalf of the delegator, and Workday evaluates security for the original owner, so the delegate can do no more than the delegator could.
-   **Reassignment.** Ownership of the step moves to a different person.
-   **Manual advance.** The step is skipped past, which is not the same as someone completing it.

Delegated items also show in the delegate’s own My Tasks, titled with “On Behalf of” and the delegator’s name, but the delegate cannot open the details until they switch accounts. If you start a proxy session as a user who has tasks delegated to them, **Switch Account** is not available.

## Delegate, request reassignment, or reassign: what is the difference?

|  | Who owns the step afterwards | Who can do it |
| --- | --- | --- |
| Delegate | Still the original assignee; the delegate acts for them | The assignee (**Manage Delegations** in My Tasks), or a business process administrator via **Manage Delegation Settings** |
| Request Reassignment | The new person, once an administrator approves | Anyone in a security group listed on the **Request Reassignment** permission of the policy (All Users by default) |
| **Reassign Tasks** | The new person, immediately, with no approval | Security groups with Modify on the **Business Process Administration** domain, or in the **Reassign Tasks** permission on that business process’s policy |

Delegation suits planned absence. Workday’s delegation can run for a date range and can name an alternate delegate. Reassignment suits a step that has to move for good, such as when the owner has left the company or lost the access the step needs.

### How a worker asks for a task to be reassigned

In My Tasks, select the Task Actions icon on the item, then **Reassign**, and choose a person or role in the Proposed Person column. The list of roles comes from the business process security policy for that step type. The request goes to the security groups in the **Reassign Tasks** permission on the policy and to groups with Modify on the **Business Process Administration** domain. If an administrator approves it, responsibility moves permanently to the new person.

If the Security Groups prompt on **Request Reassignment** is cleared on a policy, nobody can request reassignment for that process. That is a plausible reason a worker reports “there’s no Reassign option.”

### How an administrator approves or denies the request

The request arrives in the administrator’s My Tasks as a **Business Process Reassignment Request**. Choosing **Approve** requires a person in **Reassign To** (pre-filled, and you can change it). Choosing **Deny** requires a comment. After a denial the step stays in the original owner’s My Tasks, and the Full Process Record shows the step status as Denied. The **View Reassignment Requests** button filters pending requests by business process and date range for bulk handling. Rows where you leave Action empty stay open.

### How an administrator reassigns directly

Run **Reassign Tasks**, choose **Reassign Tasks for Person** (or **Reassign Non-Delegated Tasks** for steps where both the delegate and alternate delegate were excluded by routing restrictions), and optionally limit by the date the step was initiated. Workday documents what it will and will not accept as the new owner. It accepts a person with a non-worker role such as a student or an extended enterprise learner, and a terminated worker who still has an active account. It rejects someone with no active Workday account, such as a candidate.

Two gotchas from the documentation:

-   A step excluded from My Tasks will not appear in the new assignee’s My Tasks. They find it through the **Business Process Transactions Awaiting Me** report.
-   You cannot use **Reassign Tasks** on an excluded step at all. Use the **Reassign This Task** related action from the event (under Business Process), the **Reassign Business Process Step** mass operation, or the **Reassign Business Process Step** web service.

Before reassigning, confirm the new person is in a security group listed under Who Can Do Actions on Entire Business Process on the policy. Otherwise you have moved the problem to someone who cannot act on it.

## How do you manually advance a business process past a step?

Use **Manually Advance** when the step is waiting on someone who is unavailable and the process should carry on. From the event’s related actions menu choose Business Process, then **Advance Manually**. Your security group needs the **Manual Advance** action under Who Can Do Actions on Entire Business Process on the policy. Not every process allows it: run the **Business Process Configuration Options** report to see whether a given business process can be advanced, sent back or canceled.

Details that catch people out:

-   A step marked **Do Not Advance** in the definition cannot be advanced. The check box is on the business process definition.
-   An unassigned step can only be advanced if **Enable Advancing Unassigned Tasks** is selected on **Edit Tenant Setup - Business Processes**.
-   You can advance one step, or send the event to completion. The step’s assignee gets a notification unless the definition disables notifications for manual advance.
-   The Process History tab of the Full Process Record shows the skipped step as Manually Advanced.

Advancing skips the step’s work. If the step carries data entry or an approval someone is accountable for, reassigning is the safer fix.

## Send Back, Correct, Cancel and Rescind: which one is it?

These are different actions on different states (see [rescind, cancel and correct in Workday](https://kiweely.com/guides/workday-business-process-rescind-cancel-correct) for the full comparison). In short, per Workday’s description: **Send Back** returns an event to an earlier step (**Manual Send Back** lets an administrator do it even when the step is not theirs), cancel ends an in-progress event, rescind reverses a completed one, and correct changes details of an existing event. Correct is available only when the policy names the security groups that may correct. Cancel and rescind cannot be undone, and Workday records an audit trail for cancel, rescind, correct and deny.

One subprocess detail matters when a parent looks stuck. Canceling a subprocess by itself skips it without canceling the parent, and if that subprocess was the completion step the parent completes.

## How do you move many Awaiting Action steps at once?

Use **Mass Operation Management**, not a loop of single reassignments. Security is the **Mass Operation Management** domain, and users need membership in a segment-based security group with View and Modify access. You build a custom report that returns the steps, filter it on the field the operation needs, and point the task at it.

| Mass operation type | Input report filter set to True |
| --- | --- |
| Advance Business Process | Manually Advanceable |
| Reassign Business Process Step | Reassignable Step |
| Escalate Business Process Step | Step Can Escalate (the step must be awaiting action in an Action, Approval, Approval Chain, Consolidated Approval or Consolidated Approval Chain step) |
| Cancel Business Process | Cancelable |
| Cancel To Do | Cancelable To Do |

Things the documentation calls out:

-   A report returning more than the operation’s limit makes the whole run fail without processing anything. Most types are capped at 50,000 instances, with exceptions such as **Cancel Business Process** at 200,000.
-   The reassign operation attempts every step the report returns, including unassigned ones and statuses such as Saved for Later and Sent Back. Filter with the **Awaiting Persons** field to separate assigned from unassigned.
-   You cannot automate Send Back through MOM. Workday points to the **Send Back Business Process** EIB for volume send-backs, and recommends testing one sample event first.
-   The standalone **Mass Advance Business Process** task runs in the background above 10 events. For high-volume work with detailed filtering, Workday recommends MOM instead.
-   Workday suggests the standalone **Mass Cancel Business Processes** task only for fewer than 25 events.
-   **Redirect Inbox Items** is a separate MOM type for integration failures. It schedules one of three redirect actions: Move to Next Step, Terminate Business Process, or Rerun Integration.

## What can an ordinary worker do about their own Awaiting Action items?

Complete them in My Tasks, request reassignment, delegate them if the tenant allows it, or bulk approve. Bulk approval needs Modify on the **Inbox: Business Process Bulk Approval** domain, and the business process must allow it. The **Business Process Configuration Options** report shows whether Approval and Action steps qualify. A critical validation condition blocks bulk approval, a warning does not, and the task handles 100 items at a time.

Also fix the cause when it keeps happening. A Workday administrator can open **Manage Business Processes for Worker** to reassign a worker’s My Tasks items or cancel processes about that worker, and Workday lets you configure it as an Action step in processes such as **Termination** and **End Contingent Worker Contract** so that a leaver’s open tasks are handled before they go. If the delegation is not stopped when someone leaves, steps keep routing to their My Tasks.

## How do you stop the same step stalling again?

Test each condition rule with cases that run, skip and block the step. Review role assignments for every organization the process touches. Sign in as, or proxy as, each role on the path and confirm they can receive, open and complete the task. Include a departing assignee and absence cover in that test. See [why Workday business processes stall](https://kiweely.com/blog/why-workday-business-processes-stall) for recurring patterns.

Reassign and advance both change real events. Try them in a sandbox with a sample event from the same business process definition, and use a proxy session as the assignee and as the administrator to check who can see which action. The [multi-persona proxy testing guide](https://kiweely.com/guides/workday-multi-persona-proxy-testing) lays out that sequence. If the step never ran in the first place, the cause is the routing, which the [condition rule guide](https://kiweely.com/guides/condition-rule-not-working) covers.

## How Kiweely does this job

Kiweely is an AI agent for Workday in a desktop app. With your consent it can read an event’s process record, who each step waits on and the role and security behind it, so you get the likely cause and the fix. It changes the tenant only with consent.

## Frequently asked questions

### Is Awaiting Action the same as a stuck business process?

Not by itself. Workday notes that every step normally waits a day or more for the responsible person. It is stuck when nobody is assigned, the assignee cannot open the task, or the step has waited well past its due date.

### Can an administrator complete someone else's action item?

Administrator access does not make someone the assignee. Depending on the process and permissions, an administrator can reassign the step to an eligible person or arrange delegation. Advancing a step manually skips it and is not another person's approval.

### Why is the item Awaiting Action when it is not in my inbox?

Check the Full Process Record to see whether it is assigned to you, someone else or a delegate. A step can also be excluded from My Tasks, in which case the assignee finds it in the Business Process Transactions Awaiting Me report. If security changed after assignment, an administrator may need to reassign it.

### What if the assignee left the company?

Ask the business process administrator to reassign the open item to someone with the required access, then fix the role assignment or delegation so later events do not reach the same person. Confirm the replacement can open the item.

### Will completing my item finish the whole process?

Not necessarily. Later steps or a subprocess may remain. Read the Full Process Record again after completing the item and check what is still awaiting action.

### Why is there no Reassign option in My Tasks?

If the Security Groups prompt on the Request Reassignment permission of the business process security policy is cleared, nobody can request reassignment for that process. A business process administrator can still reassign the step with Reassign Tasks.

### Can I reassign hundreds of Awaiting Action steps at once?

Use Mass Operation Management with the Reassign Business Process Step type and a custom report filtered on Reassignable Step. A report that returns more than the operation limit makes the whole run fail, and most types are capped at 50,000 instances.

## Sources checked

-   [Workday: View Business Process Details](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/business-process-framework-concepts/dan1370797847910.html)
-   [Workday: FAQ: Business Processes](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/faq-business-processes/woq1472748493185.html)
-   [Workday: Actions Available on Business Processes](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/business-process-framework-concepts/mee1553714361673.html)
-   [Workday: Reassign Tasks](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/manage-business-processes/dan1370797864165.html)
-   [Workday: Delegate My Tasks](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/delegate-business-processes/business-process-task-delegation/dan1370796482940.html)
-   [Workday: Step Conditions](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/business-process-framework-concepts/dan1370796347609.html)
-   [Workday: Concept: Business Process Management](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/manage-business-processes/ikj1637605088663.html)
-   [Workday Administrator Guide: Approve or Deny Reassignment Request](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/manage-business-processes/approve-or-deny-reassignment-request.html)
-   [Workday Administrator Guide: Concept: Act On Behalf Of Another User](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/delegate-business-processes/dan1370796482081.html)
-   [Workday Administrator Guide: Concept: Manage a Worker's My Tasks Items](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/manage-business-processes/dan1370796639881.html)
-   [Workday Administrator Guide: Set Up Mass Operations](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/manage-business-processes/ala1416509465951.html)
-   [Workday Administrator Guide: Setup Considerations: Mass Operations on Business Processes](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/manage-business-processes/fet1554324204143.html)
-   [Workday Administrator Guide: Concept: Bulk Approve Business Processes](https://doc.workday.com/admin-guide/en-us/manage-workday/business-processes/manage-business-processes/mcc1590008202670.html)

## Related guides

[All guides](https://kiweely.com/guides)

-   [### Querying Pending Workday My Tasks and Inbox Approvals via API and WQL Retrieve pending Workday My Tasks items for the signed-in worker via GET /common/v1/workers/{ID}/inboxTasks, or query awaiting approvals with WQL data sources such as businessProcessTransactionsAwaitingMyAction and businessProcessStepsAwaitingMe alongside businessProcess v1 REST calls.](https://kiweely.com/guides/workday-inbox-my-tasks-awaiting-action-rest-wql)
-   [### How to Trace Who Approves a Leave or Expense Request in a Workday Supervisory Org To find who approves a worker’s leave or expense request in Workday, inspect the active Business Process Definition for the worker’s Supervisory Organization, evaluate step entry and exit condition rules, and resolve assigned and inherited roles up the management or organization hierarchy.](https://kiweely.com/guides/workday-find-approver-chain-supervisory-org-business-process)
-   [### What does rescinded mean in Workday? Rescind vs cancel vs correct, and when each applies Rescinded means Workday reversed a business process that had already passed its Completion step and restored the data to how it was before. Cancel stops one still in progress; Correct fixes the event’s details in place.](https://kiweely.com/guides/workday-business-process-rescind-cancel-correct)
-   [### Multi-Persona Testing in Workday: Verifying the Proxy Chain in Sandbox Step through the multi-persona proxy testing sequence in Workday Sandbox. Verify role handoffs, condition rule evaluation, and field writebacks across each approval tier.](https://kiweely.com/guides/workday-multi-persona-proxy-testing)
-   [### My Workday business process condition rule is not working and the step did not fire: how to troubleshoot it Work through nine checks in order: the condition’s type and polarity, which definition ran, its effective date, the Rule Tester, the field values at that moment, rule logic, how the event started, step security, and parallel step order.](https://kiweely.com/guides/condition-rule-not-working)

### More guides on Business processes and security

[All 27 guides](https://kiweely.com/guides#business-processes)

-   [Configuration Change Tracker Restricted vs Global auditor and packager](https://kiweely.com/guides/workday-cct-restricted-vs-global-packager-security)
-   [Current vs Proposed fields in Workday condition rules](https://kiweely.com/guides/workday-condition-rules-current-vs-proposed)
-   [Test Rule says Yes but the Workday BP step still skips: processing-user security](https://kiweely.com/guides/workday-test-rule-vs-processing-user-security)
-   [Review security group changes an AI assistant suggested in Workday](https://kiweely.com/guides/review-ai-workday-security-group-changes)
-   [Explain a Workday business process in plain language, then configure the rule](https://kiweely.com/guides/ai-workday-business-process-design-plain-language)
-   [Turn a requirements note into a Workday business process](https://kiweely.com/guides/ai-brd-to-workday-business-process-design)
-   [Benefits Life-Event Intake That Starts the Right Workday Process](https://kiweely.com/guides/benefits-life-event-intake-workday-business-process)
-   [How do I document Workday configuration and business processes from a live tenant?](https://kiweely.com/guides/document-workday-configuration-and-business-processes)

### From the blog on Business processes and security

[All posts](https://kiweely.com/blog)

-   [Designing Privacy-Safe Mobile Push Notifications for Workday Approvals and Pay Updates](https://kiweely.com/blog/privacy-safe-push-notifications-for-workday-tasks-on-phones)
-   [Why Building Internal Workday Apps in Retool or Lovable Stalls on OAuth and Security](https://kiweely.com/blog/retool-superblocks-lovable-on-workday-oauth-trap)
-   [How Submitting Workday Time Off from Claude or ChatGPT Works Safely End to End](https://kiweely.com/blog/submitting-workday-time-off-from-claude-chatgpt-with-approval)

## Let Workday check the work.

Kiweely writes WQL and builds orchestrations in your own tenant, and Workday, not Kiweely, says whether they passed.

[Start for free](https://kiweely.com/download) [See how it works](https://kiweely.com/vine/how-it-works)

## Get the next guide in your inbox.

One email a month with new guides and one Extend tip. Nothing else.
